Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SAMSUNG NP900X4C-A05. We hope that this SAMSUNG NP900X4C-A05 user guide will be useful to you.
Lastmanuals help download the user guide SAMSUNG NP900X4C-A05.
Detailed instructions for use are in the User's Guide.
[. . . ] · SyncMaster and the Samsung logo are registered trademarks of Samsung Electronics Co. , Ltd. · Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. · VESA, DPM, and DDC are registered trademarks of Video Electronics Standard Association. All other brand names mentioned herein are trademarks of their respective owners.
ii
CONTENTS
Contents
Max. [. . . ] 2 Press
.
to open the Setup screen.
Standby Mode
In VC mode, you can set the monitor to automatically switch to standby mode after the remote control has been left idle for a specified time: . 1 If the monitor is in PC or DVI mode, press
.
to switch to VC mode.
15
2. 8 Power-saving Modes
. 2 Press
.
to open the Setup screen.
. 3 Select an interval for activating Standby mode. Each interval is a mul.
tiple of 10 minutes from 10 to 60 minutes.
If Standby is set to 10 minutes, the monitor will automatically turn off and switch to standby mode after the remote control has been left idle for 10 minutes. 4 To turn on the monitor again, press any button other than
.
.
The monitor will automatically turn on when a call is received during standby mode. However, the monitor will not automatically power on, even if it receives a call, if it was powered off by the button.
16
3 Network and Call Settings
3. 1 Network Settings
Consult your network administrator, and configure the network settings for the monitor. The IP address can be assigned in one of the following two ways. Static IP address: The same IP address will always be assigned to the monitor whenever it is powered on. Dynamic IP address: A different IP address will be assigned to the monitor each time it is powered on. 2 To assign a dynamic IP address, set IP Assignment to Dynamic.
.
to open the Setup screen, and select Network. The system will use Network Address Translation from internal IP to External IP. The system will use external HTTP server to discover the external IP to be used. The external IP could be changed without note by Internet Service Provider. 1 Press
.
.
to open the Setup screen and go to Network.
. 2 Select and open NAT Traversal.
20
3. 3 Call Settings
. 3 Set NAT Traversal to Yes.
.
3. 3 Call Settings
Call Quality
You can adjust the sharpness of your image that is shown to the remote caller. 4 Use NAT Auto Discovery on for system to discover it's external public IP automatically.
.
. 5 Following OK, discovered external public IP will be displayed.
.
. 6 Use NAT Auto Discovery off for manual enter public IP address.
.
to open the Setup screen, and go to Call Control.
When NAT Traversal is set to Yes then Gatekeeper and H. 460 Traversal must be set to Off and vise versa. 7 On Network select H. 323 Settings and set Gatekeeper and H. 460 Traversal to Off.
.
. 8 On Network select Ports Conflagrations and verify the system
.
TCP/UDP configured ports are enabled in the router. [. . . ] 3 Set Functions Lock to On.
.
52
6. 4 Reset Settings
6. 4 Reset Settings
You can return the monitor to its default settings: . 1 Press
.
6. 5 Software Update
You can update the monitor software over the network. This will allow you to use additional functions. System supports two ways of software upgrade: By pushing the software to the SCOPIA NP900X4C-A05 from iVIEW NMS server or an external Windows (XP, 7)-based PC using the upgrade utility. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG NP900X4C-A05
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG NP900X4C-A05 will begin.
