User manual SAMSUNG SEW-3035 VIDEO

[. . . ] SafeVIEW User Manual SEW-3037W If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. English To extend your one year warranty by three months, be sure to go to www. Do not block any ventilation openings, Install in accordance with the manufacturer’s SafeVIEW Copyright 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 9. [. . . ] Voice activated (VOX) Sound level SEW-3036W The louder the sound around the camera, the more LEDs turn on. 02 Sleep Mode Portable monitoring Getting Started Press the [SLEEP] button to turn off the screen and save battery power. Your monitor will continue to detect sound around the camera. Press any button to turn the screen on again. Slide the belt clip upwards to use the integrated belt clip on the monitor. When not in use, please push the clip back to its original position. - ON - VOX - OFF DC IN 6V Out of Range Night Light SEW-3036W If the camera and monitor are not paired or if the monitor is outside of transmission range with the paired camera, the “Out of Range” message appears with warning beeps at regular intervals. Press the [ ] button on the camera or the [ the wireless monitor to turn on/off night light. ] button on Two-way talk Remote PTZ Press the [TALK] button while talking. TALK You can remotely control the camera to pan, tilt and digitally zoom. Use [$/%/_/+] buttons on the monitor to control the camera. Use [ ] from the menu to digitally zoom in. Indd 7 2012-09-03 오전 11:37:15 Viewing Mode Display Indicator Description How to use the indicator e Digital Clock f Night light Displays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format. g Monitor Speaker Mute Indicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. If battery nearly empty, it will flash to alert user to charge up the unit. A b cd e fg h i j a  ignal Indicator S No Signal Warnings The signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal – One or no bars indicate the signal is poor, and 5 bars indicate a strong signal. How to use the setup icon Adjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest. If “MUTE” is selected, no audio will be transmitted to the speaker when the [TALK] button is pressed. [. . . ] Make sure that the camera is in range of the monitor. Make sure the camera and monitor are paired. The picture may become choppy when experiencing a lower frame rate (i. Try moving the camera closer to the monitor. [. . . ]