User manual SAMSUNG SL-C410W

[. . . ] User’s Guide BASIC BASIC This guide provides information concerning the installation, basic operation and troubleshooting on windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC Available supplies 40 42 43 45 47 49 51 53 55 1. Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 9 10 11 17 20 21 22 23 Available maintenance parts Storing the toner cartridge Redistributing toner Replacing the toner cartridge Replacing the waste toner container Replacing the imaging unit Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the status LED 57 58 62 2. [. . . ] WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer’s network information is shown as follows: - IP address: 169. 254. 133. 42 - Subnet Mask: 255. 255. 0. 0 Then, the machine’s network information should be as shown below: - IP address: 169. 254. 133. 43 - Subnet Mask: 255. 255. 0. 0 (Use the computer’s subnet mask. ) - Gateway: 169. 254. 133. 1 12 The window showing the wireless network settings appears. Check the settings and click Next. 2. Using a network-connected machine 129 Wireless network setup 13 When the window that tells you that the network cable connection is confirmed appears, disconnect the network cable and click Next. If the network cable is connected, it may have trouble finding the machine when configuring the wireless network. • After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 99). • See your network administrator, or the person that set up your wireless network, for information about your network configuration. 14 15 The wireless network connects according to the network configuration. After installation is finished, click Quit. Items to prepare • • • • Access point Network-connected computer Software CD that was provided with your machine A machine installed with a wireless network interface Network cable After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installation for Mac" on page 90). 17 • Using a network cable Printing a network configuration report Machines that do not support the network interface will not be able to use this feature (see "Rear view" on page 19). You can identify the network settings of your machine by printing a network configuration report. See "Printing a network configuration report" on page 96. Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures. 2. Using a network-connected machine 130 Wireless network setup IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. See "Setting IP address" on page 96. 1 2 Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable. Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s new IP address in the browser window. [. . . ] It is a client-server protocol, where the client transmits an email message to the server. Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. [. . . ]