User manual SAMSUNG SL-C430W

[. . . ] User’s Guide C43x series C43xW series BASIC BASIC This guide provides information concerning the installation, basic operation and troubleshooting on windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC Available maintenance parts 43 44 46 48 50 52 54 56 1. Introduction Key benefits Features by model Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 4 6 9 10 11 17 20 22 23 25 Storing the toner cartridge Redistributing toner Replacing the toner cartridge Replacing the waste toner container Replacing the imaging unit Cleaning the machine Tips for moving & storing your machine 4. Troubleshooting Tips for avoiding paper jams Clearing paper jams Understanding the status LED 58 59 62 2. [. . . ] When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Follow the instructions in the installation window. Access point without a USB cable Items to prepare • • • WiFi-enabled Mac running Mac OS 10. 7 or higher and an access point (router) Software CD that was provided with your machine A machine installed with a wireless network interface 1 12 The window showing the wireless network setting appears. Check the settings and click Next. Make sure that the machine is connected to your computer and powered on. • Can start to build Wi-Fi Direct by using Samsung Easy Printer Manager (see "Setting up Wi-Fi Direct" on page 118). • Wi-Fi Direct Name: The default Wi-Fi Direct Name is the model name and the maximum length is 22 characters. • Password setting is the numeric string, and the size is 8 ~ 64 characters. 2 3 4 5 6 Insert the supplied software CD into your CD-ROM drive. Select the CD-ROM volume that appears on Finder. Read the license agreement and check installation agreement button. Using a Network-Connected Machine 115 Wireless network setup 7 8 9 10 Select Wireless on the Printer Connection Type screen. If the installer asks you to allow access to the keychain, click Allow. If the Select a wireless printer window appears, select the printer named DIRECT-xxx. Items to prepare • • • • • Access point Network-connected computer Software CD that was provided with your machine A machine installed with a wireless network interface Network cable If the Press WPS button on your printer screen appears, press the (WPS) button from the control panel within 2 minutes. Printing a network configuration report You can identify the network settings of your machine by printing a network configuration report. See "Printing a network configuration report" on page 96. 11 13 When the wireless network set up is complete, follow the instructions in the installation window. Using a network cable IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. See "Printing a network configuration report" on page 96. See your network administrator, or the person that set up your wireless network, for information about your network configuration. Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures. 2. Using a Network-Connected Machine 116 Wireless network setup Configuring the machine’s wireless network Before starting you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. To configure wireless parameters, you can use SyncThru™ Web Service. 4 If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons. • • ID: admin Password: sec0000 5 Using SyncThru™ Web Service Before starting wireless parameter configuration, check the cable connection status. When the SyncThru™ Web Service window opens, click Network Settings. Select the one Network Name(SSID) in the list. [. . . ] It is a client-server protocol, where the client transmits an email message to the server. Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. [. . . ]