User manual SAMSUNG SP-A600

[. . . ] SP-A600B DLP Projector Owner's Instructions The appearance and the color may differ depending on the model. Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . 1-3 INSTALLATION AND CONNECTION Package Contents . 2-4 Screen Size and Projection Distance . 2-10 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI . [. . . ] KEYSTONE Button ( ) Use this when the screen is displayed in a trapezoid shape. VIDEO Button Used to switch to <VIDEO> Mode. S-VIDEO Button Used to switch to <S-VIDEO> Mode. P. SIZE Button Used to adjust the size of picture screen. COMP Button Used to switch to <COMPONENT> Mode. OFF Button ( ) Used to turn off the projector. RETURN Button ( ) Returns to the previous menu. EXIT Button ( ) Used to make Menu Screen disappear. INFO STILL Button INFO: Used to check source signals, picture setup, PC screen adjustment and lamp lifespan. HDMI Button Used to switch to <HDMI> Mode. INSTALL Button Used to flip or reverse the projected image. P. MODE Button Used to select Picture Mode. PC Button Used to switch to <PC> Mode. Make sure to place your remote control on a table or desk. If you step on the remote control, you may fall and hurt yourself or the product may be damaged. You can use the remote control up to a distance of about 23 feet(7 m) from the product. Using 3-3 3-4 LED Indications LED Indications :Light is On STAND BY :Light is Blinking LAMP :Light is Off TEMP INFORMATION If you press the POWER button on the remote control or projector, the screen appears within 30 seconds. The projector is in normal operating condition. This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed. The POWER button is pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Lasts for about 1 minute) Refer to Action 1 below if the cooling fan inside the projector is not in normal operation condition. Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed properly. Power is turned off automatically when temperature inside of the projector goes beyond the control limit. A problem has occurred when operating the IC in the product. [. . . ] Rarely, non-displayable pixels may exist, however it does not affect the picture quality nor the lifespan of the product. 5-1 More Information 5-2 RS-232C Command Table Communication Format (Complies with the RS232C Standard) · · · · Baud rate : 9, 600 bps parity : None Data bits : 8, stop bit : 1 Flow Control : None Serial Communication Protocol 1. Command Packet Structure [7bytes] 0x08 · · · · · · · · · · 0x22 cmd1 cmd2 cmd3 value CS A command packet consists of 7 bytes in total. The two bytes 0x08 and 0x22 signify that the packet is for serial communication. The following 4 bytes represent a pre-defined command that can be defined by the user. [. . . ]