User manual SAMSUNG SR10F71UC

[. . . ] SR10F71UC Vacuum Cleaning Robot user manual This manual is made with 100 % recycled paper. ✻ Before operating this unit, please read the instructions carefully. English imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www. samsung. com/register DJ68-00691B-EN. indd 01 13. [. . . ] 04 MAINTAIN Cleaning the Sensor Window and the Camera You must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. ■ Never spray water, thinner, benzene etc. directly onto the main unit of vacuum cleaning robot. ■ Lightly wipe the sensor window or camera using a soft cloth. Camera Front Sensor window Front Sensor Window and Camera Cliff Sensor Window Rear Sensor Window maintain _37 DJ68-00691B-EN. indd 37 13. 30 오후 8:23 Cleaning the Dust Bin and the Filters First, empty the dust bin before cleaning it. ■ When separating the dust bin, take care not to spill the dust out of the dust bin. ■ Empty the dust bin in the following cases. When dust has accumulated inside the dust bin. When the suction power suddenly becomes weak. Press the Dust Bin Eject (PUSH) button and pull the dust bin to separate the dust bin. 2. Separate the dust bin cover by pulling it in the direction of the arrow in the figure. 3. Remove the filter and the mesh filter from the dustbin. Filter Mesh filter NOTE 4. Shake the dust from the filter, Mesh filter and dustbin. Dustbin : Wipe the water off completely. Filter, Mesh filter : Dry them completely and then reassemble them. Reassemble the filter and mesh filter onto the dustbin. - Assemble the mesh filter while the grid side is facing downward. If the orientation is not correct, you will not be able to assemble it. CAUTION If the dustbin is assembled without the filter being mounted, the error code C08 occurs. Close the dust bin cover and install it into the main unit. 38_ maintain DJ68-00691B-EN. indd 38 13. 30 오후 8:23 CLEANING THE VACUUM CLEANING ROBOT Cleaning the Power Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. • Because the dust in the dust bin may come out, separate the dust bin first before cleaning the power brush. After checking whether there are any foreign substances, press the hook that is fixing the brush cover to separate it. 2. [. . . ] Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistribution’s of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistribution’s in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. The name of the copyright holders may not be used to endorse or promote products derived from this software without specific prior written permission. This software is provided by the copyright holders and contributors “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. [. . . ]