User manual SAMSUNG SV-DVD640

[. . . ] DVD-VCR SV-DVD640 STANDBY/ON OPEN/CLOSE AUX OK www. samsungvcr. com PAL Remote Control Overview STANDBY/ON OPEN/CLOSE OK Contents Foreword Safety Instructions . 4 DVD-VCR Overviews Front View of the DVD-VCR . 20 Using the Timer Programming Feature . 22 Adjusting Picture Alignment Manually . [. . . ] 2 Select DVD using , buttons, then OK or button. , buttons, then 3 Select Language Setup using press the OK or button. Language Setup Disc Menu Audio Subtitle : English : English : Automatic Disc Menu Audio Subtitle Language Setup : English : English : Automatic 4 Select Audio using OK or button. , buttons, then press the 4 Select Subtitle using OK or button. 5 Use the , buttons, then press the 5 Press the , buttons to select English. - Select "Original" if you want the default soundtrack language to be the original language the disc is recorded in. - Select "Others" if the language you want is not listed. , buttons to select English. - Select "Automatic" if you want the subtitle language to be the same as the language selected as the audio preference. Subtitle Language Automatic Subtitle 6 Press the OK button. - English is selected and the screen returns to Language Setup menu. - Select "Others" if the language you want is not listed. Some discs may not contain the language you select as your initial language; in that case the disc will use its original language setting. - English is selected and the screen returns to Language Setup menu. ENG-29 Setting Up the Audio Options 1 With the unit in Stop mode, press the MENU button. 2 Select DVD using , buttons, then OK or button. Setup Setup Display Setup Setup : MPEG-2 Digital Out 1. Select PCM when using the Analog Audio Outputs. Bitstream : Converts to MPEG-2 Digital Bitstream (5. 1CH or 7. 1CH). Select Bitstream when using the Digital Audio Output. On : 3 Select Audio Setup using the OK or button. , buttons, then press Doesn't output digital signal. Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder. 4 Use the , buttons to select the desired item. Then press the OK or button. Dynamic Compression 1. On : Select this when the amplifier connected to the player is not 96KHz compatible. In this case, the 96KHz signals will be down converted to 48KHZ. Off : Select this when the amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes. Dolby Digital Out MPEG-2 Digital Out DTS PCM Down Sampling Dolby Digital Out 1. Select PCM when using the Analog Audio Outputs. Bitstream : Converts to Dolby Digital Bitstream (5. 1CH). Select Bitstream when using the Digital Audio Output. · How to make the SETUP menu disappear or return to menu screen during set up; Press RETURN or button. [. . . ] Press STANDBY/ON from a cold start with no disc in the unit. Press the and buttons simultaneously on the front panel for five seconds. Switch off and on the DVD-VCR by pressing STANDBY/ON button. The Parental Mode is now unlocked as indicated on the display. [. . . ]