User manual SAMSUNG T200HD

[. . . ] SyncMaster T200HD/T220HD LCD Monitor User Manual Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Notational Conventions Prohibited Important to read and understand at all times Disconnect the plug from the outlet Ground to prevent an electric shock Do not disassemble Do not touch Power When not used for extended period of time, set your computer to DPM. [. . . ] · Standard Selects the picture for the optimum display in a normal environment. · Movie Selects the picture for viewing movies in a dark room. Contrast / Brightness / Sharpness / Colour / Tint You can use the on-screen menus to change the contrast and brightness according to personal preference. · Contrast : Adjust the Contrast. Adjusting the Monitor · · · · Brightness : Adjust the Brightness. Tint : Adds a natural tone to the display. (It is activated when the signal is NTSC. ) Colour Tone The tone of the color can be changed. Cool1 / Cool2 / Normal / Warm1 / Warm2 - `Warm1' or `Warm2' is only activated when the picture mode is `Movie'. - Settings can be adjusted and stored for each external device you have connected to an input of the TV. Backlight Adjust the screen brightness by adjusting the LCD backlight. Adjusting the Monitor Size You can switch the Size. The direct button on the remote control is 'P. SIZE' button. Auto Wide - Automatically adjusts the picture size to the "16:9" aspect ratio. Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. 16:9 - Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. Wide Zoom - Magnify the size of the picture more than 4:3. (Move the screen up/donw using the or button after selecting the button. ) by pressing the or ENTER Zoom - Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. (Select selecting by pressing the or button. Use the or button to move the picture up and down. After , use the or button to magnify or reduce the picture size in the vertical direction. ) 4:3 - Sets the picture to 4:3 normal mode. Just Scan - Use the function to see the full image without any cut off when HDMI (480i / 1080i), Component (480i / 1080i) or DTV(480i / 1080i) signals are input. (Just Scan are only operated in HDMI mode. ) Screen Mode Adjusting the Monitor Only when setting the picture size to Auto Wide can the user determine the Screen mode. Each individual European country requires a different picture size so this function is intended to help users to select it. - `Screen mode' is supported in TV, Ext. , Component (480i/1080i) and HDMI (480i/1080i) - Picture Size is available in Auto Wide mode - This function is not available in PC or Component, Ext. , HDMI mode. Wide / 16:9 / Wide Zoom/ Zoom / 4:3 Digital NR Digital Noise Reduction. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. [. . . ] Broadcast Television System CommitteeThe stereo broadcasting system that is used in most of the countries that have adopted the NTSC system, including the United States, Canada, Chile, Venezuela and Taiwan. It also refers to the organization that has been organized to promote its development and management. Electronic Industries Association of Japan. DVI is the acronym for Digital Video Interface. [. . . ]