User manual SAMSUNG TC190 QUICK GUIDE

[. . . ] Samsung shall not be held liable for any damage or injury. ·Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation engineer. ·When installing the product using a wall mount, purchase a wall mount that provides at least 4 inches (10 cm) of space from the wall. ·Samsung shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications. [. . . ] The product is working properly. 2-2 Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. A blank screen appears / I cannot turn the product on Is the power cord connected properly?Is the <Check Signal Cable> message displayed on the screen? Check the connection status of the power cord. Check the cable connecting the PC and the product. If the message appears on the screen even if the cable is properly connected, recheck the input signal by pressing the /SOURCE button of the product. This occurs when the signal from the graphics card exceeds the maximum resolution or the maximum frequency of the product. In this case, set up the appropriate resolution and the frequency for the product. Is the <Not Optimum Mode> message displayed on the screen? Is a blank screen displayed and does the power LED blink at a 1 second interval? This occurs when the power saving function is running. If you click the mouse or press any key, the screen will be turned on. The on screen adjustment menu (OSD) does not appear. Check if the <OSD Adjustment Lock> function is set to Off. The color is weird / The picture is displayed in black and white Is the entire screen displayed in the same color as if viewing the screen through a cellophane paper?Check the cable connection to the computer. Reinsert the graphics card into the computer completely. Check if the <Color Effect> is set to <Off>. Is the graphics card configured correctly?Set up the graphics card referring to the user manual. The display area suddenly moves to an edge or to the center. Did you change the graphics card or the driver?Did you change the resolution and frequency appropriate to the product?Please press the [AUTO] button to run the auto adjustment function. Set the resolution and the frequency to the appropriate values in the graphics card Refer to the (Standard Signal Mode Table) Is the graphics card configured correctly?Set up the graphics card referring to the user manual. [. . . ] Install the device driver referring to the descriptions about the driver installation. A "beep, beep" sound is heard when booting the computer. If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer. Problems related to Audio No sound Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and the audio-out port on your sound card. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. 2-3 FAQ FAQ! [. . . ]