User manual SAMSUNG SYNCMASTER TS220C

[. . . ] User Manual SyncMaster TS190C TS220C TS240C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00169B-04 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. [. . . ] The stand base supplied with this product contains a circuit board. Care should be taken when handling the base. Items sold separately The following items can be purchased at your nearest retailer. HDMI-DVI cable D-SUB cable 1 Preparations 20 1 1. 2 Preparations Parts 1. 2. 1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description Open or close the onscreen display (OSD) menu, or return to the parent menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. To lock the OSD control, press the MENU button [ seconds. To unlock the locked OSD control, press the MENU button [ for more than five seconds. If the OSD control is locked, Brightness and Contrast can be adjusted, and INFORMATION can be viewed. The Customized Key function can be used by pressing the [ ] button. (The Customized Key function specified before the OSD control was locked is available even when the OSD control is locked. ) ] for five ] 1 Preparations 21 1 Preparations Icons Description Configure Customized Key and press [ be enabled. MAGICAngle SAMSUNG ]. The following options will SAMSUNG - MAGICBright - Eco Saving - Image Size To configure Customized Key, go to SETUP&RESET Customized Key and select the mode you want. Move to the upper or lower menu or adjust the value for an option on the OSD menu. Pressing the [ ] button when the OSD menu is not displayed will change the input source (Digital/Analog). If you power on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen. Press the [AUTO] button to automatically adjust the screen settings. AUTO Available only in Analog mode. Changing the resolution in Display Properties will activate the Auto Adjustment function. Turn the screen on or off. The power indicator will be lit when the product is operating normally. Refer to "11. 2 PowerSaver"for details about the power-saving function. To reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time. (Power lamp) Power on or off the product. 1 Preparations 22 1 Preparations 1. 2. 2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. LAN AUDIO OUT RGB OUT DVI OUT DC 14V OUT DC 14V IN Port Connect to a USB device. Ports Connect to a network using the LAN cable. Connect to an audio output device such as headphones. Connect to the monitor using the D-SUB cable. Connect to the monitor using the DVI cable. [DC 14V OUT] Connect to the extension cable. [DC 14V] port on the monitor using the power [DC 14V IN] Connect to the DC power adapter. 1 Preparations 23 1 Preparations 1. 2. 3 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DVI IN RGB IN DC 14V MIC Port Ports Connect to a PC or the stand base using the DVI cable. [. . . ] The resolutions available vary depending on the display device. 3 Multiple Display When two display devices are connected to the Client, specify how you will use the screens. To display the same desktop on the displays, select Clone. When Clone is selected, the same Orientation and Resolution will be applied to the displays. 2 Using "Zero Client" 45 2 Using "Zero Client" To display an extended desktop on the two displays, select Extend. The display selected as the primary screen will be placed on the left. To set the selected display as the primary screen, select the Set as the main screen checkbox. 2 Using "Zero Client" 46 2 Using "Zero Client" When only one display device is connected, the Multiple Display option is disabled. Toolbar Select whether to display the toolbar or enable the shortcut keys on the Client. Always hide toolbar Hide the toolbar on the screen: select the checkbox and minimize the toolbar. [. . . ]