User manual SAMSUNG VAS2626S

[. . . ] · To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. CAUTION · Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. · The Mains plug is used as a disconnect device and shall stay readily operable at any time. DANGER CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. (FDA 21 CFR) CAUTION · CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM (IEC 60825-1) · THIS PRODUCT UTILIZES A LASER. [. . . ] The volume decreases as you move closer to ­6. Adjusting Center/Surround/Subwoofer Level The volume level can be adjusted in steps from +6dB to ­6dB. The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB. Audio Setup Speaker Setting Speaker Size You can set the Speaker Size of the Center and Surround Speakers, as well as Test Tone in this mode. Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone : Off Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers. You can also set the Test Tone in this mode. mMove " Select ' Return " Select ' Return Setting up the Speaker Delay Time When 5. 1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers. Settings Delay Time Front Center Surround Subwoofer Test Tone : Off : 00ms : 00ms · For the Front, the mode is set to Small. · For the Subwoofer, the mode is set to Present. · For the Center and Surround, you can switch the mode to Small or None. - Small : Select this when using the speakers. - None : Select this when no speaker is connected. NOTE The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings. Sound Edit You can adjust the balance and level for each speaker. Settings Sound Edit Front Bal. dB L dB L R R dB dB <Change " Select mmove ' Return ' Return " Select NOTE The Delay Time menu will be activated only when a 5. 1 channel source is played. You can not set Center and Surround in this mode when their Speaker Size is set to NONE. dB dB dB Center Level Surround Level SW Level <Change " Select ' Return mMove " Select ' Return Press the buttons to select and adjust the desired speaker. OSD Language Disc Menu Audio Subtitle Select the language for the on-screen displays. Select the language for the disc menu displays. Select the language for disc subtitles. mMove " Select ' Return Change Password Select Change and enter the 4-digit password to set the parental lock using the number buttons on the remote control. Settings Display Audio System Language Security Support Parental Rating : Off Password : Change NOTE a To select a language that does not appear in the menu, select OTHERS in the Disc Menu, Audio and Subtitle, and enter the language code of your country (see page 35). a You cannot select OTHERS in the OSD Language menu. The selected language will only appear if it is supported on the disc. If you forgot your password 1. Press and hold the STOP () button on the remote control for 5 seconds or more. All settings will revert to the factory settings. Security The Parental Lock function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Support Product Information Provide the product information such as Model code, Softrware Version, etc. Parental Rating Select the rating level you want to set. A larger number indicates that the program is intended for adult use only. For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. Enter the password and then press the ENTER button. [. . . ] All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young (eay@cryptsoft. com)" The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-). If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft. com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. [. . . ]