User manual SAMSUNG WF1702XEC/XSA

[. . . ] WF1702XE(C/U/V/W/Y)(S) WF1700XE(C/U/V/W/Y)(S) Washing Machine user manual This manual is made with 100% recycled paper. imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www. samsung. com/register WF1702XE-02967K_EN. indd 1 2013-2-26 14:59:41 features of your new samsung washing machine Your new washing machine will change the way you feel about doing laundry. From its super-size capacity to its energy efficiency, the Samsung washing machine has all the features to turn a mundane chore into a pleasure. • Energy Saving This model offers more efficient energy use compared to standard A rated machine with the special Bubble generator system and Quiet Drive inverter motor. • VRT PLUS (Vibration Reduction Technology , Selected Models) This Samsung washer performs very quietly minimizing noise and vibration with 3D vibration sensors and smart control technology, which enables it to maintain the lowest possible vibration. [. . . ] Fabrics include functional technology finishes and fibers such as spandex, stretch, and micro-fiber. Baby Care - High temperature wash and extra rinses ensure that no washing powder remains to mark your thin clothes. • The wool course washes the laundry using gentle cradling actions. During the wash, the gentle cradling and soaking actions are continued to protect the wool fibers from shrinkage / distortion and for a super gentle clean. • Neutral detergent is recommended for wool course, for improved washing results and for improved care of the wool fibers. 2 CYCLE SELECTOR 22_ washing a load of laundry WF1702XE-02967K_EN. indd 22 2013-2-26 14:59:49 Hand Wash - A very light wash cycle as gentle as a hand wash. Spin - Performs an additional spin cycle to remove more water. Rinse + Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load. 3 TEMPERATURE SELECTION BUTTON RINSE SELECTION BUTTON Press this button repeatedly to cycle through the available water temperature options: (Cold Water , 30 ˚C, 40 ˚C , 60 ˚C and 95 ˚C). Press this button to add additional rinse cycles. The maximum number of rinse cycles is five. Press the button repeatedly to cycle through the available speeds for the spin cycle. WF1702 , , , 400, 800, 1000, 1200 rpm , 400, 600, 800, 1000 rpm 02 Washing a load of laundry 4 5 SPIN SELECTION BUTTON WF1700 “No spin ” - The laundry remains in the drum and no spin cycle is performed after the final drain. ” -The laundry remains soaking in the final rinse water. “Rinse Hold Before the laundry can be unloaded, either a Drain or Spin cycle must be performed. Press this button repeatedly to cycle through the wash options:  Intensive  Pre Wash  Soak + Intensive Soak Soak + Pre Wash  Intensive + Pre Wash  Soak Intensive + Pre Wash  off  + 6 WASH OPTION SELECTION BUTTON ”: Press this button when the laundry is heavily soiled and “Intensive needs to be washed intensively. The cycle time is increased for each ”: Use this option to effectively remove stains from your cycle. “Soak laundry by soaking your laundry. • The Soak function is performed 13 minutes into the wash cycle. • The Soak function continues for 30 minutes with six cycles, where one cycle is a soak cycle that spins for 1 minute and stands still for 4 minutes. • The Soak function is only available for the following wash programs: Cotton, Synthetics, Denim, Bedding, Baby care, Daily wash. “Pre Wash ”: Pre-wash is only available with:Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Baby Care. Bubble selection is turned on as a default. Press the Bubble option button once to deselect and the Bubble Generator OFF (shown on the panel), press it again to turn the function back ON. • Some wash cycles must have Bubble option ON (will show on the panel, and the Generator will turn on automatically). [. . . ] • Make sure the drainage hose is installed correctly. If only one item of clothing needs washing, such as a bathrobe or pair of denim, the final spin result might be unsatisfactory and an “UE” error message will be shown in the display window. • This occurs when too much foaming is detected. It is also displayed while foaming is removed. [. . . ]