User manual SAMSUNG XPRESS SL-M2078W

[. . . ] User’s Guide BASIC BASIC This guide provides information concerning the installation, basic operation and troubleshooting on windows. ADVANCED This guide provides information about the installation, advanced configuration, operation and troubleshooting on various OS environments. Some features may not be available depending on models or countries. BASIC 1. Introduction Key benefits Features by models Useful to know About this user’s guide Safety information Machine overview Control panel overview Turning on the machine Installing the driver locally Reinstalling the driver 5 7 12 13 14 19 23 27 28 29 3. Maintenance Ordering supplies and accessories Available supplies Storing the toner cartridge Redistributing toner Replacing the toner cartridge Monitoring the supplies life Setting the toner low alert Cleaning the machine Tips for moving & storing your machine 67 68 69 71 73 75 76 77 83 4. [. . . ] Download the app and try again. 1 2 Check that NFC and Wi-Fi Direct enabled features are on your cell phone and Wi-Fi Direct feature is enabled on your printer (see "Setting up Wi-Fi Direct" on page 168). Tag the NFC antenna on your cell phone(usually located on the back of the cell phone) over the NFC tag( ) on your printer. Wait few seconds for Samsung Mobile Print app to start. 3 4 Select scan mode. Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 47). If neccessary, change the scan option by pressing the . 2. Using a Network-Connected Machine 176 Using the NFC feature 5 Tag the NFC antenna on your cell phone(usually located on the back of the cell phone) over the NFC tag( ) on your printer. Wait few seconds for the cell phone to connect to the printer. • For some cell phones, NFC antenna might not be located at the back of the cell phone. Check the location of the NFC antenna on your cell phone before tagging. • If error message about changed PIN number appears, enter a changed PIN number and press OK. Follow the instruction on the app screen to update the PIN number. 6 The printer starts scanning the content. The scanned data is saved on your cell phone. If you want to continue scanning, follow the instruction on the app screen. 2. Using a Network-Connected Machine 177 3. Useful Setting Menus This chapter explains how to browse the current status of your machine, and the method of setting for advanced machine setup. • Before you begin reading a chapter • Copy menu • Fax menu • System setup 179 180 182 185 Before you begin reading a chapter This chapter explains all the features available for this series' models to help users easily understand the features. You can check the features available for each model in the Basic Guide (see "Menu overview" on page 31). The following are tips for using this chapter • • • • The control panel provides access to various menus to set up the machine or use the machine’s functions. These menus can be accessed by pressing Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. For models that do not have the (Menu) on the control panel, this feature is not applicable (see "Control panel overview" on page 23). (Menu). Some menu names may differ from your machine depending on its options or the models. 3. Useful Setting Menus 179 Copy menu 1 Copy feature Item Description Adjusts the brightness level to make a copy that is easier to read, when the original contains faint markings and dark images (see "Darkness" on page 57) Improves the copy quality by selecting the document type for the current copy job (see "Original" on page 57) Set the machine to sort the copy job. For example, if you make 2 copies of a 3 page original, one complete 3 page document will print followed by a second complete document. • On: Prints output in sets to match the sequence of originals. Darkness Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 31). Original Type To change the menu options: • • • Press (copy) > (Menu) > Copy Feature on the control panel. Or press Setup > Machine Setup > Default Setting > Copy Default. Or press Copy > select the menu item you want. Item Original Size Sets the image size. [. . . ] It is a client-server protocol, where the client transmits an email message to the server. Transmission Confirmation Report (TCR) provides details of each transmission such as job status, transmission result and number of pages sent. This report can be set to print after each job or only after failed transmissions. TIFF Tagged Image File Format (TIFF) is a variable-resolution bitmapped image format. TIFF describes image data that typically come from scanners. [. . . ]