User manual SAMSUNG YP-F2JXB

[. . . ] For Your Safety WARNING Product Use Read this manual carefully to ensure proper use of the product and to avoid any danger or physical damage. Failing to heed the product instructions may cause serious injury. Improper use can result in explosion, fire or electric shock. Do not disassemble, repair or modify this product on your own. Do not get the product wet or drop it in water. If the product gets wet, do not switch it on. Contact a Service Center. To avoid hearing damage Using the earphone or headphone for an extended time can cause serious damage to your hearing. If you are exposed to sound louder than 85db for an extended time, you may adversely affect your hearing. The louder the sound is, the more seriously damaged your hearing may be (an ordinary conversation is 50 to 60 db and the noise level on a busy road is approximately 80 db). [. . . ] - When the [loeoe] or [l] button is pressed, moving to the previous or next track. - The starting point of the section repeat is set but the ending point is not set until the current track ends. 31 Listening to Music User Button - Custom Function (Continued) To use the DNSe button For a description of DNSe, see page 41. Set the User Button Mode to <DNSe> and press the [ USER/ s MENU] button. DNSe mode changes in the following order each time the button is pressed <NORMAL> <ROCK> <HOUSE> <JAZZ> <DANCE> <BALLAD> <R&B> <CLASSICAL> <USER EQ> <3D USER> <3D STUDIO> <3D STAGE> <3D CLUB>. To use the Play Speed button Set the User Button Mode to <Play Speed> and press the [ USER/ s MENU] button. Playback speed changes in the following order each time the button is pressed <x0. 7> <x0. 8> <x0. 9> <x1. 0> (Normal speed) <x1. 1> <x1. 2> <x1. 3>. (The higher the number is, the faster the playback speed is. ) To use the Play Mode button Set the User Button Mode to <Play Mode> and press the [ USER/ s MENU] button. Playback mode changes in the following order each time the button is pressed <Normal> <Repeat One> <Repeat All> <Shuffle All>. 32 Listening to FM Radio Listening to FM Radio Before you start! Connect your earphones to the player and turn the power on and check the battery status. the [ USER/ 1 Press and holdmenu screen. to move to the MENU] button [ + , ] button to select <FM 2 Press thepress- the [ USER/ MENU]Radio> and then button. s Chapter 3. Listening to Music/FM Radio User Button Custom Function/ FM radio reception will start. To automatically search for frequencies 1 Press the [ USER/ Manual tuning Mode. s MENU] button to select The <PRESET> message will disappear from the screen display and go into manual mode. Listening to FM Radio 2 Press and hold the [ loeoe ] or [ l] button and then release. s The frequencies are automatically searched. To stop the search when you reach a desired frequency, press the [ loeoe ] or [ l] button again. To manually search for frequencies 1 Press the [ USER/ Manual tuning Mode. s s MENU] button to select The <PRESET> message will disappear from the screen display and go into manual mode. 2 Press the [ loeoe ] or [ l] button. Moves to the next frequency whenever the button is pressed. 33 Listening to FM Radio Setting a Frequency Up to 20 frequencies can be stored. To automatically set frequencies the [ USER/ 1 Press and holdmenu screen. MENU] button to move to the the + , 2 Presspress[ the-[] button to select <Settings> and then USER/ MENU] button. s The Settings menu appears. 3 4 5 To cancel during setting Press the [ + , - ] button to select <FM Radio> and then press the [ USER/ MENU] button. s The FM Radio menu appears. Press the [ + , - ] button to select <Auto Preset> and then press the [ USER/ MENU] button. s The Auto Preset Confirm window will appear. Press the [ + , - ] button to select <Yes> and then press the [ USER/ MENU] button. s The <AUTO> message appears and the first 20 frequencies are automatically preset. To cancel during <Auto Preset> setting, press the [ loeoe ] or [ l] button. s The auto preset setting is canceled and frequencies set up to then are stored. s To set <Auto Preset> again after setting preset, existing frequencies are deleted entirely and you can reset from start. NOTE s 34 CAUTION Always connect your earphones to the player when searching or setting frequencies. The earphones are used as antennas to receive FM radio reception. To manually set frequencies 1 Press the [ USER/ Manual tuning Mode. s MENU] button to select The <PRESET> message will disappear from the screen display and go into manual mode. Chapter 3. Listening to Music/FM Radio Setting a Frequency Press the [ ] or [ l] 2 frequenciesloeoepreset. button to search for to 3 Press the [ s s ] button. The <Save?> message will appear. [ loeoe ] [l] button to specify preset 4 Press theand thenorpress the [ USER/ MENU] button. numbers The <SAVED!!> message will appear and the selected frequency is set to the specified preset number. To search for frequencies in PRESET mode 1 Press the [ USER/ <Preset Mode>. s s MENU] button and select The <PRESET> message will appear on the screen display and go into preset mode. 2 Press the [ loeoe ] or [ l] button. The preset number is selected and you can listen to the stored radio frequency. 35 Listening to FM Radio To Delete Presets Before you start! Follow the steps below to delete frequencies while listening to FM radio. s 1 Press the [ USER/ <Preset Mode>. s MENU] button and select The <PRESET> message will appear on the screen display and go into the preset mode. Press l] button 2 presetthe [loeoe ] or [to delete. to search for frequencies 3 Press the [ s ] button. The <Delete?> message will appear. the [ l] 4 Presspress[loeoe ][ orUSER/ button to select <Y> and then the MENU] button. s The <DELETED!!> message will appear and the selected preset number is deleted. To cancel preset number delete, select <N>. s 36 Listening to FM Radio Setting FM Radio To set FM region the [ USER/ 1 Press and holdmenu screen. to move to the MENU] button Chapter 3. Listening to Music/FM Radio To Delete Presets/ [ + , ] button to select <Settings> 2 Press thepress- the [ USER/ MENU] button. and then s The Settings menu appears. the + , 3 Presspress[ the-[] button to select <FM Radio> and then USER/ MENU] button. s The FM Radio menu appears. [ + , ] button to select <FM 4 Press thepress- the [ USER/ MENU]Region> and then button. s Setting FM Radio The FM Region menu appears. [ + , ] button to select the FM region 5 Press thepress- the [ USER/ MENU] button. and then s You can select from <Korea/USA> <Japan> <Other Countries> . s NOTE Frequency range by region - Korea/USA:Search for FM frequencies in 100 kHz increments between 87. 5 MHz~108. 0 MHz. - Japan:Search for FM frequencies in 100 kHz increments between 76. 0 MHz~108. 0 MHz. - Other Countries:Search for FM frequencies in 50 kHz increments between 87. 5 MHz~108. 0 MHz. If you change the FM region, the previously stored radio frequencies are removed. s 37 Listening to FM Radio Setting FM Radio (Continued) To set FM sensitivity the [ USER/ 1 Press and holdmenu screen. to move to the MENU] button [ + , ] button to select <Settings> 2 Press thepress- the [ USER/ MENU] button. [. . . ] <ID3-Tag> : Set the track information language. Select from <Afrikaans> <Basque> <Catalan> <Chinese(S)> <Chinese(T)> <Czech> <Danish> <Dutch> <English> <Estonian> <Finnish> <French> <German> <Greek> <Hrvatski> <Hungarian> <Icelandic> <Italian> <Japanese> <Korean> <Norwegian> <Polish> <Portuguese> <Romany> <Russian> <Slovak> <Slovene> <Spanish> <Swedish> <Thai> <Turkish> and <Vietnamese>. s s The supported languages can be changed or added. What is ID3-Tag? This is what is attached to an MP3 to carry information relevant to the file, such as the title, artist, album, year, genre and a comment field. NOTE s s 44 When you have made a change of ID-Tag language setting, turn off the product and restart it so the change can be applied. Settings Setting the System You can set the Default Volume, Resume and Beep Sound functions. Press and hold the [ USER/ 1 move to the menu screen. MENU] button to [ + , ] button to select <Settings> 2 Press thepress- the [ USER/ MENU] button. and then s The Settings menu appears. Chapter 4. Settings [ + , ] button to select <System> 3 Press thepress- the [ USER/ MENU] button. [. . . ]