User manual SAMSUNG YP-U2JZB

[. . . ] YP-U2J For Your Safety WARNING Product Use Read this manual carefully to ensure proper use of the product and to avoid any danger or physical damage. Failing to heed the product instructions may cause serious injury. Improper use can result in explosion, fire or electric shock. Do not disassemble, repair or modify this product on your own. To avoid hearing damage Using the earphone or headphone for an extended time can cause serious damage to your hearing. If you are exposed to sound louder than 85db for an extended time, you may adversely affect your hearing. The louder the sound is, the more seriously damaged your hearing may be (an ordinary conversation is 50 to 60 db and the noise level on a busy road is approximately 80 db). You are strongly advised to set the volume level to medium (the medium level is usually less than 2/3 of the maximum). Do not get the product wet or drop it in water. If the product gets wet, do not switch it on. Contact a Service Center. If you feel a ringing in the ear(s), lower the volume or stop using the earphone or headphone. Do not place the product in damp, dusty or sooty areas, as it could result in fire or electric shock. [. . . ] Listening to Music/FM Radio To Play a Favorit/ 1 Press and hold the [ screen. I ] button to move to the menu the + , 2 PressPress[ the-[] button to select <Settings> and then ] button. The Settings menu will appear. , - button to 3 Press the [ +then] press the [select <User Button Mode> and ] button. I User Button Custom Function The User Button Mode menu will appear. -] to select 4 Press the [ + , andbuttonpress the [the]desired user button mode then button. I I I I <Repeat AB> : Sets section repeat. <Play Speed> : Adjusts the playback speed between fast and slow. <Play Mode> : Selects the repeat playback mode. 31 Listening to Music User Button - Custom Function (Continued) To set Section Repeat This function enables you to listen to specific parts of a track repeatedly. Recommended for language learning. 1 Set the User Button Mode to <Repeat AB> and play a file of your choice. USER/ ] button 2 Press the [ you want to repeat. at the beginning of the section I The starting point is set and <A display window. > will appear in the screen [ ] 3 Press the theUSER/ youbuttontoagain to set the ending of section want repeat. I <A B> will appear on the screen and the specified section starts to play repeatedly. To cancel Section Repeat Press the [ USER/ I ] button again during Section Repeat. Section Repeat will be canceled. I NOTE Section Repeat will be automatically canceled in the following cases. - When the [loeoe] or [l] button is pressed, moving to the previous or next track. - The starting point of the section repeat is set but the ending point is not set until the current track ends. 32 To use the DNSe button I For a description of DNSe, see page 45. Set the User Button Mode to <DNSe> and press the [ USER/ ] button. DNSe mode changes in the following order each time the button is pressed <NORMAL> <ROCK> <HOUSE> <DANCE> <JAZZ> <BALLAD> <R&B> <CLASSICAL> <USER EQ> <3D USER> <3D STUDIO> <3D STAGE> <3D CLUB>. Chapter 3. Listening to Music/FM Radio User Button Custom Function To use the Play Speed button Set the User Button Mode to <Play Speed> and press the [ USER/ I ] button. Playback speed changes in the following order each time the button is pressed <x0. 7> <x0. 8> <x0. 9> <x1. 0>(Normal speed) <x1. 1> <x1. 2> <x1. 3>. (The higher the number is, the faster the playback speed is. ) To use the Play Mode button Set the User Button Mode to <Play Mode> and press the [ USER/ I ] button. Playback mode changes in the following order each time the button is pressed <Normal> <Repeat All> <Repeat One> <Shuffle All>. 33 Listening to FM Radio Listening to FM Radio Before you start! Connect your earphones to the player and turn the power on and check the battery status. I and hold 1 Press screen. the [ menu ] button to move to the [ + , ] button 2 Press thepress- the [ ] to select <FM Radio> and then button. I FM radio reception will start. To use the mute function Press the [ radio. I I ] button while listening to FM The MUTE message will appear and no sound is emitted. To turn the sound back on, press the [ again. ] button 34 Listening to FM Radio Searching for Frequencies To automatically search for frequencies Frequencies can only be searched in FM Radio mode. 1 Press the [ I ] button to select Manual tuning Mode. Chapter 3. Listening to Music/FM Radio Listening to FM Radio/ The <PRESET> message will disappear from the screen display and go into manual mode. 2 Press and hold the [ loeoe ] or [ l] button and then release. I The frequencies are automatically searched. To stop the search when you reach a desired frequency, press the [ loeoe ] or [ l] button again. Searching for Frequencies To manually search for frequencies 1 Press the [ I ] button to select Manual tuning Mode. The <PRESET> message will disappear from the screen display and go into manual mode. 2 Press the [ loeoe ] or [ l] button. I Moves to the next frequency whenever the button is pressed. 35 Listening to FM Radio Setting a Frequency Up to 20 frequencies can be stored. To automatically set frequencies and hold 1 Press screen. the [ menu ] button to move to the the + , 2 Presspress[ the-[] button to select <Settings> and then ] button. I The Settings menu appears. the + , 3 Presspress[ the [] button to select <FM Radio> and then ] button. I The FM Radio menu appears. the + , 4 Presspress[ the [] button to select <Auto Preset> and then ] button. I The Auto Preset Confirm window will appear. the ] button 5 Press the [[ + , -] button. to select <Yes> and then press I The <AUTO> message appears and the first 20 frequencies are automatically preset. 36 To cancel during setting To cancel during <Auto Preset> setting, press the [ loeoe ] or [ l] button. I The auto preset setting is canceled and frequencies set up to then are stored. Chapter 3. Listening to Music/FM Radio Setting a Frequency I NOTE To set <Auto Preset> again after setting preset, existing frequencies are deleted entirely and you can reset from start. I CAUTION Always connect your earphones to the player when searching or setting frequencies. The earphones are used as antennas to receive FM radio reception. 37 Listening to FM Radio Setting a Frequency (Continued) To manually set frequencies 1 Press the [ I ] button to select Manual tuning Mode. The <PRESET> message will disappear from the screen display and go into manual mode. Press the [ ] or [ l] 2 frequenciesloeoepreset. button to search for to 3 Press the [ I I USER/ ] button. The <Save?> message will appear. Press the [ loeoe ] or [ l]button specify 4 numbers and then press the [ tobutton. preset ] The <SAVED!!> message will appear and the selected frequency is set to the specified preset number. To search for frequencies in PRESET mode 1 Press the [ I I ] button and select <Preset Mode>. The <PRESET> message will appear on the screen display and go into preset mode. 2 Press the [ loeoe ] or [ l] button. The preset number is selected and you can listen to the stored radio frequency. 38 Listening to FM Radio To Delete Presets Before you start! Follow the steps below to delete frequencies while listening to FM radio. I 1 Press the [ I ] button and select <Preset Mode>. Chapter 3. Listening to Music/FM Radio Setting a Frequency/ The <PRESET> message will appear on the screen display and go into the preset mode. l] button 2 Press the [loeoe ] or [to delete. [. . . ] <Backlight Time> : Sets to automatically turn off the backlight after there is no button operation during the preset time. Select either <05 Sec> <15 Sec> <30 Sec> <60 Sec> or <Always On>. <Contrast> : Adjusts the brightness of the screen display window. <Display Time> : Check the time in the desired format during music playback. [. . . ]