User manual SANGEAN WFR-1

[. . . ] 21 To share media using Windows Media Player 11: . 27 On the remote control you will find numeric keys 1-10 that are used to store preset stations. see Remote Control on page 5 for more details. When no station is assigned to a number, "Preset empty" is displayed on the screen. [. . . ] press BACK to activate the menu then: 1. Navigate through the selections by rotating the Turning knob on the radio clockwise or counter clockwise to move the > symbol and press the Turning knob to confirm the selection. Use the navigation buttons (TUNE +, TUNE-, BACK, FWD) on the remote control to move the > symbol and press enter to confirm the selection. Entering Texts To start using the radio, text entering may be required. For example, entering user name, password, search station, etc. Use C to cancel and exit Use to enter when you are done. Language Setup Choose the language to display on the screen. Connecting Devices to the Radio See the following illustration for descriptions of the outlets on the back panel. Before you can use your internet radio, you must have the following: A broadband internet connection or A wireless access point (Wi-Fi) or a wired Ethernet connection (10 or 100 M bits/sec with RJ45 connection) connected to your broadband internet, preferably via a router. In many cases the broadband modem, router and wireless access point will be a single combined unit supplied by your Internet Service Provider or bought from a computer store. If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption then you need to know the WEP or WPA key so you can get the internet radio to communicate with the network. IMPORTANT: Before you continue, make sure that your wireless access point or router is powered up and working with your broadband internet service (use your computer to verify this). To get this part of the system working you must read the instructions supplied with the wireless access point or router. Make sure you are within range of a wireless network. You will be prompted to enter password: Rotate the Turning knob to highlight the text/number/symbol Press the Turning knob to confirm. < to delete C to cancel and exit to enter when you are done 4. rotate the Turning knob to highlight the text/number/symbol Press the Turning knob to confirm. < to delete C to cancel and exit to enter when you are done 4. the screen will show "Connected" when connection had been made. If you have problems with your wired connection, the lights by the LAN (RJ-45) connector may help you to identify the possible cause of the problem: Green ON = Link established, Flashing = Data transfer Yellow ON = 100M bps link, OFF = 10M bps link 15 The radio will play the last played radio station. If you would like to select other stations, follow the instruction below. to search for stations on the internet: Press BACK to activate the menu and go to Station list. [. . . ] Save: The settings will not be saved and activated until this option has been selected. If there is a newer version of software available, the user will be asked to confirm the upgrade. If the radio lost power during the upgrade, it may restart automatically in USB upgrade mode. Upgrade via USB A user may choose to use this method instead of Internet Software Upgrade if a network connection is not available or the power was removed from the radio during Internet software upgrade. [. . . ]