User manual SANUS SYSTEMS CAPC01

[. . . ] It is not necessary to contact the retailer with any questions or problems, as parts can be sent directly to you Please follow these assembly instructions. This will save you time, make assembly easier and prevent possible damage to your new Digital TV Stand. [. . . ] Assistance may be required for some assembly procedures. Correct assembly is your responsibility. We recommend that the unit is assembled on a soft surface such as carpet. Please record your serial number in the space provided below and retain this manual for future reference. Serial No This unit was manufactured using ISO 9000 certified systems. For improvement purposes, design and specifications are subject to change without notice. BUS5305 CAUTION There are many small components used in the construction of this unit. These loose items should be kept away from young children while assembling your unit. Shelf Pin P840048 x 8 P860121 x 1 P860035 x 6 Barrel nut P840050 x 8 P860015 x 8 Connector rod P820016T x 8 Cam P820015T x 8 Wooden dowel P800201 x 8 P816145 x 4 Cable Ducts P840170 x 2 Insert wooden dowels into sides as shown. x8 1. Tilt and slide Glass Shelf between Rails (ensuring frosted side down) and place on top of Shelf Pins. Insert Shelf Pins into holes at the upper positions of one Side only. Tilt and slide the second Glass Shelf between Side Rails. While holding one end of the shelf on pins on one side insert remaining Shelf Pins into other side beneath Glass, then lower the shelf on top of the pins. 1. Press fit 2 Cable Ducts into large holes in the Base. You have now completed the assembly of your new Digital TV stand. NOTE: We recommend that all contents stored in or on this item of furniture be removed before shifting it. [. . . ] Press fit 2 Cable Ducts into large holes in the Base. You have now completed the assembly of your new Digital TV stand. NOTE: We recommend that all contents stored in or on this item of furniture be removed before shifting it. [. . . ]