User manual SANUS SYSTEMS FMK056

[. . . ] It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. ~ Before installing the appliance, ~ Be certain your appliance is ~ Hardwiring the appliance should be performed by a certified electrician in compliance with all local and national codes, and requirements. damaged cord or plug, or if the appliance has been damaged in any manner. Contact Miele's Technical Service Department. ~ Do not operate any appliance with a ~ Defective components should be replaced by Miele original spare parts only. [. . . ] ~ Do not use the plate warmer to heat the room. Due to the high temperatures radiated, objects left near the appliance could be damaged. ~ Do not lean, sit or overload the warming drawer. The drawer can hold a maximum of 33 lbs (15 kg). 6 Guide to the machine a On/Off button (lights up) b Temperature selector c Warming drawer d Non-slip mat e Indicator f Warning sticker to indicate burn hazard 7 Before using for the first time Clean the appliance ^ Remove any protective wrapping. ^ Remove the non-slip mat and clean with a solution of warm water and liquid dish soap. ^ Clean the plate warmer, inside and out, with a damp cloth and wipe dry. ^ Replace the non/slip mat once it has completely dried. Heat the appliance ^ Heat the empty plate warmer for a minimum of 2 hours. Turn the temperature selector to "Maximum" (see "Selecting a temperature"). ^ Vent the room when heating the drawer for the first time. Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The smell will dissipate after a short time and does not indicate a faulty connection. 8 Using the plate warmer The plate warmer is only intended for warming dishes. ^ Clean the mat by hand with warm water and liquid dish soap. Do not return the mat until it is completely dry. Never clean in the washing machine or dishwasher. All surfaces of the appliance are susceptible to scratching. Appliance front / interior Remove spills as soon as possible. Otherwise the soiling may become hard to remove. If spills are allowed to sit for an extended period of time or if unsuitable cleaning agents are used the surfaces may discolor or change. ^ Clean the appliance with a solution of warm water and liquid soap applied with a soft sponge. Glass cleaners may be used to clean the exterior. However do not allow them to sit or "puddle", this can cause damage to the surface. Remove the cleaner promptly. 12 Frequently asked questions , Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. The dishes are not warm enough. [. . . ] However, under certain conditions it may be possible for an installation in these applications. Please contact the Miele Technical Service Department with specific requirements. Repairs and service by unqualified persons could be dangerous. Before connecting the appliance to the power supply, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. [. . . ]