User manual SANUS SYSTEMS VLF311

[. . . ] The electrical safety of this appliance can only be guaranteed when continuity exists between the appliance and an effective grounding system, which complies with local and national safety regulations. It is imperative that this basic safety requirement is tested by a qualified electrician. The manufacturer cannot be held responsible for the consequences of an inadequate grounding system (e. g. This appliance must only be used once it has been installed in cabinetry to ensure that all electrical components are shielded. [. . . ] They should never be allowed to sit or stand on any part of the appliance. Caution: Do not store items of interest to children in cabinets above or in the plate warmer. Children climbing on the appliance to reach these items could be seriously injured. Loose-fitting or hanging garments should never be worn while using the plate warmer. Use only dry, heat resistant pot holders. Moist or damp pot holders used on hot surfaces may result in steam burns. Do not substitute towels or other bulky items for pot holders. Do not use the appliance to heat the room. Due to the high temperatures radiated, objects left near the appliance could catch fire. Under no circumstances use a steam cleaner to clean this appliance. The steam could penetrate electrical components and cause a short circuit. 6 place settings: 6 dinner plates (11"/28 cm) 6 dessert bowl 3 serving bowls 2 plates (14 "/ 36 cm) or one of the following: ­ 20 dinner plates (11"/28 cm) ­ 36 soup bowls (8"/22 cm) ­ 30 dessert bowls ­ 10 dinner plates (11"/28 cm) 10 soup bowls (8"/22 cm) ­ 80 espresso cups ­ 40 cappuccino cups ­ 30 punch glasses ­ 18 soup bowls (8"/22 cm) 2 soup tureens (8" x 7"/ 21 cm x 18 cm) Loading the drawer The quantity which can be loaded will depend on the type and size of your dishes. (25 kg. ) Do not stand plates up directly in front of the rail. When the drawer is closed, these will block the vents for the heated air and prevent the dishes from warming evenly. 9 Using the plate warmer Selecting a temperature The temperature control is used to adjust the temperature setting. Only turn the temperature control clockwise and then back again. Forcing the control past this point will damage it. The heat will shut off automatically when the selected temperature is reached. It will turn back on again as soon as the temperature drops below the selected temperature. A temperature range between approximately 86 °F and 176°F (30 °C and 80 °C) can be set. Recommended temperatures for pre-heating: ­ approximately 104 °F (40 °C) b for cups and glasses. A hot drink placed in a cup warmed to this temperature will not cool as fast, while the cup itself can be touched easily. ­ approximately 140 °F (60 °C) r for serving dishes, bowls and plates Food will stay hot longer if placed on plates heated to this temperature while the plates will not be too hot to handle. Warming times Various factors will affect the warming times: ­ material and thickness of dishes, ­ quantity, ­ how dishes are arranged, ­ temperature setting. [. . . ] Various factors can affect how long the dishes take to heat up, for example: ­ material and thickness of dishes, ­ quantity, ­ how the dishes are arranged, ­ temperature setting. The times stated are only given as a guide. As you use the plate warmer you will learn which setting suits your needs best. If any of the following problems occur, please contact your Miele dealer or the 12 After sales service In the event of a fault which you cannot correct yourself please contact: ­ Your Miele Dealer or ­ The Miele Technical Service Department USA CDN 1-800-999-1360 techserv@mieleusa. com 1-800-565-6435 service@miele. ca When contacting the Technical Service Department, please quote the model and serial number of your appliance both of which are shown on the data plate which is next to the control panel. 13 Electrical connection The electrical installation instructions for any appliance installed in combination with the plate warmer must be observed. [. . . ]