Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SANUS SYSTEMS VMUC1S INS. We hope that this SANUS SYSTEMS VMUC1S INS user guide will be useful to you.
Lastmanuals help download the user guide SANUS SYSTEMS VMUC1S INS.
Manual abstract: user guide SANUS SYSTEMS VMUC1S INS
Detailed instructions for use are in the User's Guide.
[. . . ] Check carefully to make sure that there are no missing or defective parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. [. . . ] Do not put your fingers or cables between movable parts. Once the Mount Assembly (a) is secured to the cabinet, align the appropriate slots in the mounting plate with the four mounting holes of your LCD display. Use either four M4 x 10 mm Bolts (d) or four M4 x 20 mm Bolts (e) with four . 5 inch Spacers (f). Diagram 4a below shows the M4 x 10 mm Bolts being used. Diagram 4b on the next page shows the M4 x 20 mm Bolts with the . 5 inch Spacers. Detailed View Diagram 4a
LCD panel d mounting plate
Step 4 (cont) The . 5 inch Spacers (f) should only be used if there is an obstruction or the hole pattern is physically recessed on the back of the LCD panel. See Diagram 4b for assistance.
Detailed View
Diagram 4b
e
mounting plate f LCD Panel
Step 5: Adjusting the screen height. Using a Phillips screw driver, slightly loosen the Bolts (d, e) that secure the LCD panel to the mounting plate. Adjust the LCD panel to the desired height. Tighten the Bolts (d, e) to secure the LCD panel to the mounting plate. Diagram 5
d, e
mounting plate
Step 6: Adjust tension of Mount Assembly The tension of the Mount Assembly (a) can be adjusted by simply tightening or loosening the tension bolt labeled in Diagram 6 with the provided Allen Key (h). Diagram 6 Detailed View
tension bolt
Step 7: Remove Cable Cover Using a Phillips screw driver, loosen the screw in the center of the cable cover and remove cover. [. . . ] You can attach the Cable Ties (g) in locations marked in Diagram 8 below. Reinstall the cable cover and the base cover in the same manner they were removed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS SYSTEMS VMUC1S INS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS SYSTEMS VMUC1S INS will begin.
