User manual SANYO AD-2001KIT BROCHURE

[. . . ] Ability to program the number of times messages will be repeated to each telephone number dialed. Number of dialing attempts is programmable as well. Two Way Voice Verification The 2-way voice verification feature allows the person called to listen in through the highly sensitive microphone or have a speakerphone conversation. Universal Dial Tone (UDT) The Exclusive Universal Dial Tone feature makes the AD-2000 series suitable for use worldwide. It also adapts to the `Voice Message Systems' of AT&T as well as voice systems of other phone companies. Memory The AD-2001KIT and AD-2000KIT has EEPROM memory and will retain programming in the case of power outage. Remote Turn Off Line Seizure Called party may turn off activated channel while leaving other channels armed. Built in Line Seizure. [. . . ] G: TONE/PULSE dialing-Same for all channels. H: ATTEMPTS: Programmable 1 to 9 (applies to all numbers). Numbers are dialed sequentially from 1 to 9 times regardless if attempts to connect are successful or not. 3) THE FOLLOWING OUTGOING MESSAGE (OGM) OPTIONS ARE AVAILABLE: 8) TWO-WAY MODE: During the listen-in mode, the called party may initiate the two-way conversation mode for minimum 60 seconds by pressing digit "2" Anytime during the two-way mode, the 60-second . period can be restarted by pressing "2" again, as many times as needed. 9) REMOTE SHUT OFF: While in listen-in or two-way mode the called party may terminate the dialing process and deactivate the channel by pressing "#" twice within 1 second (touch-only). This activation effectively stops further dialing resulting from a continuously activated channel until it is fully restored, while leaving other channels active. 10) LINE SEIZURE: Internal switching relay and terminals are provided to allow for line seizure hookup of incoming telephone line. A: No OGM. C: 2 equally long OGM segments (maximum 25. 5 seconds/segment). D: ID segment plus equally split OGM1 and OGM2 periods. E: 3 equally long OGM segments (maximum 17 seconds. segment). F: ID segment plus equally split OGM1, OGM2, OGM3 periods. G: 4 equally long OGM segments (maximum 12. 75 seconds/segment). H: ID segment plus equally split OGM1, OGM2, OGM3 and OGM4 periods. Note: Maximum duration of the ID segment under options (D), (F) and (H) is limited to 15 seconds, in which case the maximum length of each OGM is equally portioned so that the sum of OGMs and ID is 51 seconds. If less than 15 seconds is used for the ID, the available (maximum) time for OGM messages is automatically increased so that the sum of the OGMs and ID again is 51 seconds. 11) AUX ALARM: An open collector transistor circuit allows for enternal devices like sirens, relays, etc. to be activated when any of the 4 channels are active. [. . . ] ID followed by OGM1, OGM2, . . . ) is played only once in the TEST mode. 4) MESSAGE ALERT: Programmable 1 to 3 times. Note: The entire 5) EEPROM MEMORY: Voice messages, phone numbers and dialer status information remain stored even after total power failure. 6) LCD NUMERIC DISPLAY: A 2-line by 16 character LCD panel is used to display program, test and status information. DIMENSIONS: 6" x 4" X 1. 5" WEIGHT: 8oz. - this product is manufactured by United Security Products 7) LISTEN-IN: The listen-in feature can be initiated by the called party (touch-tone only) anytime during the OGM playback cycle by simply pressing "1" This will start a minimum 60-second listening . [. . . ]