User manual SANYO ADVANCED SCREEN MANAGER

[. . . ] English Warp & Blending ADVANCED SCREEN MANAGER Owner's Manual Caution for using this software When installing this software on a computer, make sure to read carefully [License Agreement] on the installation screen. We assume no responsibility for any computer or system troubles, data lost, data corruption or malfunction of equipments caused by the software or mishandling. We highly recommend to store the important data in the recording medium to another disc. You may not copy the printed materials accompanying with the software. The contents of this manual might be changed without notice. [. . . ] Calculate (w) and (d) with the same unit of length. (d) is the distance between the projector and surface (Its width is (w)) which is vertical to the optical axis. View angle (degree) = (180 / 3. 1416) * 2 *atan ((w/2)/d) Width (w) Distance (d) View angle 15 STEP-2 Image Editing STEP-2 Image Editing 10. Image Editing Select the editing type along with the shape of the screen and edit. Spherical editing Edit to project on the spherical screen. 2. Horizontal curve editing Edit to project on the horizontally curved screen. Keystone editing 5. Grid [New] editing 6. Grid [Transition] editing 7. Blending Edit to project on the vertically curved screen. Edit to project diagonally on the flat screen. Edit the details of any of 1. Spherical correction, 2. Horizontal curve , 3. Vertical curve, 4. Keystone by cell unit Edit to project one screen with using several projectors, 16 STEP-2 Image Editing Spherical This editing is to project on the spherical screen. Select "Spherical correctione" from either "Type(T)" in the menu or the toolbar. The grid screen for Spherical correction appears. English Basic adjustment Adjustment points (Points enable to drag. ) A to H (The points are different from editing screen. ) are displayed on the screen. Click the nearest intersection point to the alphabet position, a point will be appear on the grid. Drag this point with a mouse and edit the grid shape. You can also adjust with right click of a mouse and arrow key by 0. 1 dot unit after selecting the adjustment points. If the editing is not appropriate to project on a spherical screen or any of the corner points of the grid go over the size of the screen, the square grid will disappear. At this stage, you cannot edit each point nor send the data to the projector. Edit each corner point again to get the correct position then the grid will appear again and editing becomes possible. Clue to adjust: First, drag each corner with a mouse pointer and make the grid screen smaller then start editing. 17 STEP-2 Image Editing Spherical Drag points with a mouse and edit the grid to spherical shape. If the position of the grid screen is not correct, the grid lines in the square will disappear. You can confirm the editing with sending the edited data to the projector. (See p29 Sending ) You cannot drag each of B, D, E, G point when editing each of them to get the curved line and further editing become impossible on calculational basis or when each of A, C, F, H point go over the size of the screen. [. . . ] Data Sending English Sending Send the edited data to Warp&Blending Board of the projector. Select "Send(T)" from either "File(F)" in the menu or the toolbar icon to display the send dialog. Press "Start" button then the data will be converted to the binary data and sent to the Warp&Blending Board of the projector. Parts name of the dialog and functions qID No. [. . . ]