User manual SANYO AVP-4231

[. . . ] INSTRUCTION MANUAL AVP-4231 42"* Plasma High-definition Colour TV with ATSC Digital Tuner * Diagonal measure For best TV picture quality and channel selection connect to a digital cable or satellite receiver. Help Line: 1-800-263-2244 Monday to Friday 9am-5pm (Eastern) www. sanyo. ca Thank you for choosing SANYO. This product incorporates latest-generation features including an ATSC digital tuner. Please read all instructions carefully to obtain maximum benefit of your product. [. . . ] or6 button Press OK or 4 button to enter the menu page. or4 Within the menu, use 5 navigate or adjust. , 6 , 3 to Press OK or4 button to confirm, enter sub-menu or toggle the settings of the selected menu item. Press MENU button to return to the previous level menu. Press EXIT button to exit the main menu and return to your program. Note: to clearly introduce the menu operations , this operation manual provides a description based on operation with the remote control. Displaying Status Information Press the INFO button on the remote control, the unit will display current status information such as channel number or signal source, etc. On-screen Menu Language Selection Source Video TV 1 2 3 4 1 2 Press MENU. Time Set Sleep Timer Parental Control Closed Caption Options CC when Mute Off or6 Press 5 Feature menu, press OK or4 to select to access the submenu. Setup Press 5 Menu Language item, press OK or4 or6 to select to select your desired language. Feature Audio Off English Menu Language To Move OK To Select Exit To Exit Press EXIT button to return to TV viewing. Source Video TV Selecting Input Source Signal Navigate to the Feature menu and highlight Source. to select your Time Set Sleep Timer Parental Control Closed Caption Options CC when Mute Menu Language Off Audio Setup Off English Note: You may directly press INPUT button on the remote control to select input source. Feature To Move OK To Select Exit To Exit VGA-------Select signal from D-SUB input interface. Composite1-------Select signal from AV INPUT1 terminals. HDMI-------Select signal from HDMI input interface. Composite2-------Select signal from AV INPUT2 terminals. S-Video-------Select signal from S-VIDEO input terminal. Component1------Select signal from COMPONENT INPUT1 terminals. Component2------Select signal from COMPONENT INPUT2 terminals. 16 Memorizing the Channels This unit can automatically find all channels available through antenna or cable inputs, and store them in memory. Note: Be sure to select the TV source before operation. Selecting the Tuning Band Before your TV can memorize the available channels, you must specify the type of signal source that is connected to the unit. (i. e. , an antenna or cable system) 1 2 3 4 5 Press MENU to display the menu main page. or 6 to select Press OK or 4 Tuning Band. to select the Video Audio Tuning Band DTV Signal Auto Ch Search Manual Ch Set Channel Labels Air Setup To Move OK To Select Exit To Exit Feature Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected. h antenna, select Air; If using If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area's cable system. (For further band information, contact your cable service provider. ) Tuning Band Air Auto Channel Search Video Audio DTV Signal Auto Ch Search Manual Ch Set Channel Labels 1 2 Navigate to the Setup sub-menu and highlight Auto Ch Search. to begin the The unit will automatically search for all available TV/DTV (if using antenna), CATV/CADTV (if using cable) program. Note: If you want to stop the auto-search, press EXIT button. Digital (CADTV) cable systems may cause several unviewable channels to be memorized. Setup To Move OK To Select Exit To Exit Feature Autoprogram Menu NTSC Channel 12 Channels Found Progress (%) 7 Found 3 Manual Channel Set After setting channels into memory, you can add or delete channels from the default channel list as follows: Tuning Band Video Audio DTV Signal Auto Ch Search Air 1 2 3 4 Navigate to the Setup sub-menu and highlight Manual Ch Set. Press OK or 4 to open Manual Channel Set Menu sub-menu. Setup Manual Ch Set Channel Labels Use 5to select a channel, then press the OK button or6 button to add or delete the channel. [. . . ] This warranty only applies in favor of the original retail purchaser of the warranted product. SANYO CANADA INC. 'S RESPONSIBILITY During the warranty period, SANYO Canada Inc. will repair, or at our option, replace a Color Television product which shows evidence of a manufacturing defect in materials or workmanship. Replacement PARTS are warranted for the remaining portion of the warranty period. [. . . ]