User manual SANYO BIG-100K

[. . . ] (See page 42. ) Compatibility The projector widely accepts various video and computer input signals including; Computers, 6 Color systems, Component video, S-video and RGB scart. Blackboard Function Blackboard can be used as a projection screen. The board color is limited to Green. (See page 29 and 35. ) Simple Computer System Setting The projector has the Multi-scan system to conform to almost all computer output signals quickly. (See page 26. ) Film Function The Film function reproduces pictures faithful to the original film quality from 3:2 pull-down video contents. (See page 37. ) Digital Zoom (for Computer) The digital zoom function expands (to approx. 16 times of screen size) or compress the image size, allowing you to focus on crucial information at a presentation. [. . . ] Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Quit Exits the PC Adjust Menu. Vacant Mode To store adjustment data This Mode has parameters being stored. shows values of "Total dots, " "Horizontal, " "Vertical, " "Display area H, " and "Display area V. " To clear adjustment data closes this dialog box. Note: Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be selected when "480i", "575i", "480p", "575p", "720p", "1035i", or "1080i" is selected in the PC System Menu (p25). 28 Computer Input Image Level Selection Direct Operation Select an image level among Standard, Real, Blackboard(Green), Image 1, Image 2, Image 3, and Image 4 by pressing the IMAGE button on the remote control. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. Blackboard(Green) Picture level suitable for the image projected on a blackboard (Green). This mode assists to enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board. Image 1~4 User preset image in the Image Adjust Menu (p30). IMAGE button Standard Real Blackboard(Green) Image 1 Image 2 Image 3 Image 4 Computer Input Menu Operation Image Select Menu icon 1 2 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Select Menu icon. Press the Point d button to move the red frame pointer to the level that you want to set and then press the SELECT button. True Provides image in its original size. When the original image size is larger than the screen size (1024 x 768), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and the message "D. Press the SELECT button to expand the image size. And press the Point ed7 8 button to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM button on the remote control. Digital zoom ­ When the Digital zoom ­ is selected, the On-Screen Menu disappears and the message "D. Press the SELECT button to compress the image size. [. . . ] (The WARNING indicator keeps blinking. ) Check and clean the Air filter. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filters. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. [. . . ]