User manual SANYO CDP-244

[. . . ] SAFETY TIPS Thank you for purchasing the SANYO CDP-244/CDP-244CRB. The CDP-244 comes with headphones and an AC adapter. The CDP-244CRB comes with headphones, an AC adapter, car cassette adapter and cigarette lighter adapter. CAUTIONS FOR SAFETY Do not take the unit apart. [. . . ] Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping them with a cloth should remove most particles. Wipe in a straight motion from the inside to the outside of the disc. Car Stereo COMPACT DIGITAL AUDIO Dirty. scratched or warped discs may cause skipping or noise. Pay attention to the following: Handle the disc only by the edges. To keep the disc clean, do not touch the surface of the disc. EN OP LINE OUT Change the cord exit location (back or either side of the pack). Push the cord back into the slot. YES NO or Car Stereo Discs should be returned to their cases Never use chemicals such as record after use to avoid serious scratches that could cause the laser pickup to skip. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Prolonged exposure to high temperatures can warp a disc. cleaning sprays, anti-static sprays or thinner to clean compact discs. Such chemicals can damage the disc. i The unit will not play a disc that has been inserted upside down or discs that do not EN OP conform to the Compact Disc standard. Also, the unit might not play discs that are scratched, soiled or carry fingerprints. i 3" (8-cm) CDs can be played without an adapter. LINE OUT 6 7 PLAYING A DISC Be sure to reduce the volume before plugging in or unplugging the headphones. Plug Slide the OPEN latch to release the CD PLAYING A DISC Close the lid and press the PLAY/PAUSE button( ). The disc will begin to spin, after a few seconds the display will indicate and the total number of tracks and total playing time on the disc, playing will begin automatically from track number 1. Adjust the volume. Set the following functions as desired. i BASS X BOOST i Digital ANTI-S function To stop play temporarily, press the lid. the cord from a pair headphones into the PHONES jack. of OPEN Hold the disc with the label side up button. i The elapsed playing time flashes in and press it onto the spindle until it "clicks" into place. the display. EN OP i Press the button again to resume. To stop play, press the STOP button . Total tracks and total playing time appears in the display. Press STOP again to turn power off. TRACK SEARCH Press the SEARCH buttons during play to skip to the desired track. Press the button to skip to the next track on the disc. Press the button to start at the beginning of the track currently playing. Press the button twice or more to skip to previous tracks. 8 9 PLAYING A DISC FORWARD/BACKWARD SEARCH Press and hold the or buttons during play to scan the disc at high speed. When the desired section of the disc is found, release the button. . . . . . . . . . . . . . . . . . Forward . . . . . . . . . . . . . . . . . Reverse If you press and hold the BASSXPANDER BASS X PANDER Use this function to increase the bass output. OFF BASS X ON BOOST button while playing, it will scan the track forward at high speed. If you press and hold the button while playing, it will scan the track backward at high speed. ANTI-SKIP PROTECTION The ultimate anti-skip protection keeps the music playing under virtually any conditions. [. . . ] Make sure batteries are fresh or adapter has power. 14 15 SPECIFICATIONS Frequency Response CD PLAYER SECTION Frequency Response Wow and Flutter Sampling Frequency D/A Converter Error Correction Method Pickup General GENERAL Maximum output (stereo headphones) Dimensions (Approx. ) millimeter (W x H x D) Weight (Approx. ) 20mW+20mW (32 ) 143. 5mm x 27mm x143. 5mm 220 g 3V: Using two "AA" batteries Input: 120V / 60Hz Output: 4. 5V/600mA 20 Hz -20 kHz 20Hz-20kHz Below measurable limits 44. 1 kHz 1-bit CIRC Optical 3-beam semiconductor laser (780 nm wavelength) THE SANYO COMFORT WARRANTY AUDIO PRODUCTS WARRANTY APPLICATION New, unused Sanyo Audio products purchased through a Sanyo authorized dealer in Canada are warranted against manufacturing defects in materials and workmanship for ONE YEAR from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. SANYO CANADA INC. 'S RESPONSIBILITY During the warranty period, SANYO Canada Inc. will repair, or at our option, replace an Audio product which shows evidence of a manufacturing defect in materials or workmanship. [. . . ]