User manual SANYO CLT-5810

[. . . ] UP015DH(CLT5810) ENG OM 3/9/05 10:36 AM Page i INSTRUCTION MANUAL CLT-5810 5. 8-GHz Cordless Telephone with Call Manager Features IMPORTANT Charge the handset battery pack for a full 15-20 hours before using your cordless handset for the first time. www. sanyocanada. com UP015DH(CLT5810) ENG OM 3/9/05 10:36 AM Page ii Introduction Congratulations on your purchase of the CLT-5810 cordless telephone from SANYO. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 5. 8 GHz technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features G Call Manager Features*: Caller ID and Caller ID on Call Waiting. *Each feature works with your network service. A subscription is required. G 30-Number Caller ID List G 3-Line, 16-Character Backlit Handset Display G Speed Dial G 20-Name/Number Directory G Last Number Redial G English, French or Spanish Display Option G Voice Mail Waiting Indicator G 14-Day Standby Battery Life/7-Hour Talk Time G 10-Channel Autoscan G Call Time Display G Pulse/Tone Dialing G Page/Handset Locator G Handset Earpiece and Ringer Volume Controls G Wall-Mountable G Hearing Aid Compatible Your Sanyo 5. 8-GHz COMPANDER PLUS cordless telephone is a fine-quality home communications product. [. . . ] Press the SELECT key, the number is dialed. To hang up, press the END key. Select Memory 01 SANYO 02 Alison 4 E23 UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 24 DIRECTORY Chain dialing The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. An example of this is a bank account number. Once you have called your bank, and are prompted to enter the account number, press the MEM key and select the location number where the special number has been stored. Store your special number with an identifying name. (Refer to "Storing phone numbers and names" on page E19. ) E24 UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 25 DIRECTORY Editing a stored name and/or phone number 1 Press the MEM key in standby mode, Select Memory ¨Select Memory¨ is displayed. 2 01 SANYO 02 Alison Press the VOL/RING or VOL/RING key, or enter a number (0 - 9) to select the 01:SANYO 9057609944 memory location you would like to edit, and press the MEM or SELECT key. Press the MEM or SELECT key a second time. The following screen appears with the memory location number that you have selected in the display. Edit Memory01 Delete Memory01 Go Back 3 4 Press the VOL/RING or VOL/RING key to select ¨Edit MemoryXX¨, then press the MEM or SELECT key. The cursor flashes, indicating that the display is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line. Store Name SANYO 5 6 Use the /TONE/ , #/ , DELETE/CH, or any number key to edit the name. (See page E21. ) To edit only the phone number, skip this step. The following screen appears. Store Number 9057609944 The cursor flashes indicating that the display is ready for the number to be edited. 7 Use the /TONE/ , #/ , REDIAL/PAUSE, DELETE/CH, or any number key to edit the phone number. The phone number cannot exceed 20 digits. (See page E20. ) If you don´t want to change the phone number, skip this step. E25 UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 26 DIRECTORY 8 Press the MEM or SELECT key. changed either a name or phone number, Yes No a confirmation display shows up. If it is correct, press the VOL/RING key to move the pointer to ¨Yes¨ and press the SELECT key. You will hear a confirmation Memory01 Stored tone, and the following screen appears. For example, if you store a name and number into memory location number 01, 01 SANYO 02 Alison the display shows ¨Memory01 Stored¨. 03 MOM AND DAD After about 2 seconds, Select Memory screen is displayed. 9 Press the END key to return to standby mode. E26 UP015DH(CLT5810) ENG OM 3/9/05 10:37 AM Page 27 DIRECTORY Erasing a stored name and phone number Select Memory 1 Press the MEM key in standby mode. 01 SANYO ¨Select Memory¨ is displayed. 02 Alison 2 3 Press the VOL/RING or VOL/RING key, or enter a number (0 - 9) to select the memory location you would like to erase. The name and phone number selected appears with the memory location number that you have selected in the display. 02:Alison 5452930 4 5 6 7 8 9 Press the MEM or SELECT key again. [. . . ] (f) Adjustments that are outlined in the Operating Manual. (g) Accessory items including antenna, and batteries, (h) Damage in or due to transportation. (i) Damage due to improper maintenance, accident, abuse, misuse or negligence. (j) Damage caused by lightning and power surges. [. . . ]