User manual SANYO CLT-670

[. . . ] a "single narrow band" used in standard digital transmissions. The result is the clarity of digital sound, extended range and a secure conversation with virtually no interference from other 900-MHz cordless phones or radio transmission devices. The clearest channel is automatically selected for each transmission. The phone selects one of over 65, 000 digital security codes for the handset and base. [. . . ] (When the phone number is 15 digits or longer, only 1 is displayed. ) Press 1 Press 3 again to remove the long distance prefix 1-. to add or delete the area code from the displayed phone number. 5/17 12:30PM 03 SANYO 1-905-760-9944 Note: The phone numbers and names of the caller ID list can be up to 15 characters each. E27 CLT9960 2nd 6/30/00 6:42 PM Page 32 CALLER ID FEATURES Deleting information from the Caller ID list The Caller ID list of the CLT-670 stores up to 50 entries. If the phone receives the 51st call, the oldest one in the list is automatically deleted. Any Caller ID entry can be deleted manually. Deleting a Caller ID entry 1 Press CALL ID/FLASH. Display the name/number to be deleted from the Caller ID list by pressing or . 5/17 12:30PM 03 SANYO 905-760-9944 2 Press DELETE/SCAN. Delete Message?Yes No 3 4 Press or to select Yes or No. Press SELECT or DELETE/SCAN. When the pointer is at Yes: A beep tone sounds and the next Caller ID name/number is displayed. When the pointer is at No: The display returns to the Caller ID display. Note: If you receive an incoming call, the deleting operation is cancelled. E28 CLT9960 2nd 6/30/00 6:42 PM Page 33 CALLER ID FEATURES 1 2 Press CALL ID/FLASH. Deleting all Caller ID names/numbers New :01 Total:02 Press DELETE/SCAN. Delete All?Yes No 3 4 Press or to select Yes or No. Press SELECT or DELETE/SCAN. When the pointer is at Yes: A beep tone sounds and all stored Caller ID entries are deleted. Total:00 When the pointer is at No: The display returns to the summary screen. New :01 Total:02 Note: If you receive an incoming call, the deleting operation is cancelled. E29 CLT9960 2nd 6/30/00 6:42 PM Page 34 CALLER ID FEATURES Using the Caller ID list Calling a party from the Caller ID list You can place a call from the Caller ID list. 1 Press CALL ID/FLASH. Select the phone number that you want to dial by pressing or . 5/17 12:30PM 03 SANYO 905-760-9944 2 Press TALK/END. The CLT-670 allows you to program your Voice Mailbox access number into its memory for quick retrieval of your messages. Pre-Programmed Calling Features (page E37) The following calling features offered by many telephone companies are pre-programmed for easy access. · · · · · Last Call Return Busy Call Return Cancel Call Waiting Call Screen Select Blocking Call Waiting with Options (page E40) The following options are pre-programmed to use with Call Waiting with Options (Call Director) service. · · · · · · · · Switch/FLASH Ask to hold Tell busy Take message Answer/drop 1 Conference Drop first Drop last E33 CLT9960 3rd 7/14/00 1:13 PM Page 38 ADVANCED CALLING Voice Mail access FEATURES If you subscribe to voice mail service, you can program your CLT-670 to easily access your voice mailbox. The VOICE MAIL indicator on the base of your phone flashes whenever you have messages waiting in your voice mailbox. Programming your access number 1 2 Press and hold MENU/SERVICE. The display shows: Edit Service 01 Voice mail 02 Network Svc mail. Press SELECT to select Voice The display shows: Store Number If you have previously stored a number, the display will show: Edit Number Delete Number Go Back 3 4 Enter your Mailbox access number. You will hear a long beep and the display shows: Number Stored Note: You must subscribe to voice mail service from your telephone company in order to use this feature. Retrieving your voice mail messages The VOICE MAIL indicator on the base will flash when you have received new voice messages. 1 2 E34 To access your Voice Mailbox, press MENU/SERVICE and select Voice mail. Then press TALK/END. CLT9960 3rd 7/25/00 3:42 PM Page 39 ADVANCED CALLING FEATURES Resetting the message waiting indicator You may need to occasionally reset the VOICE MAIL indicator if it remains on after you have retrieved your messages. To reset the indicator, put the handset to the base then press and hold the PAGE/FIND key for two seconds, or until the indicator stops flashing. VOICE MAIL indicator PAGE/FIND key Paging To locate the handset 1 2 Press PAGE/FIND on the base less than 2 seconds. The following screen appears: Paging 3 Notes: Press any key on the handset to stop paging. · By holding PAGE/FIND for more than 2 seconds and up to 60 seconds, the handset beeps for 60 seconds. If you press and hold for more than 60 seconds, the handset beeps until you release the key. · When a call is received during paging, paging stops and the handset rings. · If you press TALK/END during paging, the handset turns into talk mode. [. . . ] (c) Communications products purchased from non Sanyo-authorized dealer. (d) Communications products not intended for Canadian usage or products without appropriate Canadian regulatory approvals. (e) Problems due to product set-up and installation. (f) Adjustments that are outlined in the Operating Manual. [. . . ]