User manual SANYO CLT-9840

[. . . ] INSTRUCTION MANUAL CLT-9840 CLT-9925 CLT-9935 Main Features 900-MHz Technology Extended Range -The use of 900-MHz frequency band for signal transmission between base and handset means greater communication range compared to conventional 43 ­ 49 MHz cordless telephones. Ultra-Low Noise -The high frequency communication has also significantly reduced noise level. 40-Channel Auto/Manual Scan -Your new telephone uses one of 40 channels in the 900-MHz frequency band. It automatically selects a clear channel every time you receive or place a call on the handset. [. . . ] Press CHAN/DEL again to erase the displayed data. Then the next Caller ID entry shows on screen. Make sure the phone is off (not in TALK mode). Use the CID/VOL keys to display any Caller ID entry. Press and hold CHAN/DEL until the phone beeps and DELETE ALL?Press CHAN/DEL again to erase entire list. For example after you dial 9 for an outside line, or to wait for a computer access tone. Each pause counts as 1 digit in the dialing sequence. Reviewing and deleting directory contents 1. Press MEM, then use the CID/VOL keys to view the directory. While the desired entry is displayed, press CHAN/DEL key. Note: If the handset battery is removed for more than 5 minutes, the directory memory and Caller ID memory will be erased. Charge the handset battery for 12 continuous hours prior to first use. Caution: To reduce the risk of fire or personal injury, use a 3. 6V, 600 mAh battery. Power Failure During the period that the power is off, you will not be able to make or receive calls with the telephone. After a power outage, place the handset in the base for about 20 seconds to reset the digital security code. LCD SCREEN MESSAGES The following messages show the status of a call or of the phone. INCOMPLETE DATA Caller information has been interrupted during transmission or the phone line is excessively noisy. ENTER NAME Prompt telling you to enter the name for one of 10 directory locations. ENTER TEL NUMBR Prompt telling you to enter the telephone number for one of 10 directory locations. Prompt asking if you want to erase an entry in the Caller ID list or directory. Prompt asking if you want to erase entire Caller ID list. DELETED Prompt confirming the Caller ID/Directory entry is erased. [. . . ] This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. THE SANYO COMFORT WARRANTY WARRANTY APPLICATION Sanyo Communications products purchased new, unused in Canada through a Sanyo Authorized Dealer are warranted against manufacturing defects in materials and workmanship for ONE YEAR covering parts and labour, from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. [. . . ]