User manual SANYO CLT-W20

[. . . ] Switching between speaker phone and handset Intercom and room monitoring . Using intercom while you are on a call . Conferencing after intercom conversation . 10 Storing a name/number in the directory . [. . . ] Caller identification information appears on screen after you hear the tone. · IMPORTANT: To use these features you must subscribe to either the standard Name/Number Caller ID Service or Caller ID with Call Waiting Service. Time Date Number of calls Press the FLASH/PROGRAM key to put the current call on hold so that you can answer the incoming call. 1. Press CID to scroll through the Caller ID list from the most recent to the oldest. You can also use the CID or key on the base. Press CID to scroll through the Caller ID list from the oldest to the most recent. Note: You may also transfer Caller ID entries to the directory. See Storing caller ID entries in directory below. Storing Caller ID entries in the directory Before storing a caller ID number, make sure the number appears in proper digits for your dialing area. If not, change it using the 7-10-11 key. For example, if the Caller ID number appears 1 - 4 1 6 - 2 2 2 - 5 5 5 5 but it is not a long distance number, press the 7-10-11 key until it 416-222-5555 shows 4 1 6 - 2 2 2 - 5 5 5 5 (without 1). Number Name The 7-10-11 key (or 7-10-11/HOLD key on the handset) lets you select how many digits of the number are displayed: 7 10 11 Caller ID list The incoming caller information transmitted from the phone company is received by your phone between the first and second rings and stored in the Caller ID list. If you answer a call before the second ring the caller information may not be stored. When the Caller ID list memory is full, a new call automatically NEW replaces the oldest call in memory. N E W appears on screen for calls received that have not been reviewed. This directory feature is in addition to the 40 Caller ID list. Storing a name/number in the directory The phone must be OFF (not in TALK mode). 5. MEMO # M E M O # and S E L E C T M E M O 1 - 0 shows on screen. SELECT MEMO 1 - 0 Press the desired memory location (0 through 9) or use the CID or keys to find an empty memory location. For example, to enter the name Alice Roy: Press the 2 key once for the letter A. Press the 5 key 3 times for the letter L. Press the 4 key 3 times for the letter I. Press the 2 key 3 times for the letter C. Press the 1 key to insert a space between the letter E and R. Continue to enter the letters of the last name. Note: The cursor will automatically move to the next position when another number key is pressed. The screen shows M E M O # and E N T E R T E L N U M B R . [. . . ] Accessory items including antenna, and batteries, Damage in or due to transportation. Damage due to improper maintenance, accident, abuse, misuse or negligence. Damage caused by lightning and power surges. LIMITATIONS a. reserves the right to change or improve the design of the model of the product warranted hereunder without incurring any obligation to make any modifications to or to install any improvement in or on the product. [. . . ]