User manual SANYO CLT-W25

[. . . ] a "single narrow band" used in standard digital transmissions. The result is the clarity of digital sound, extended range and a secure conversation with virtually no interference from other 2. 4 GHz cordless phones or radio transmission devices. The clearest channel is automatically selected for each transmission. The phone selects one of over 65, 000 digital security codes for the handset and base. [. . . ] (A pause counts as one digit. ) Temporary Tone Dialing Even if your phone line is pulse dialing, you can still access special telephone services that are available to tone dialing lines only. After the line is connected, press TONE. The subsequent numbers dialed will be sent as tone dialing. Storing a Number in Memory Your CLT-W25 phone has 10 memory locations for storing important telephone numbers. Memory storing can be done only when the handset is out of the base and not in use. Storing Mixed Tone/Pulse Numbers If you have a pulse dialing line and use the temporary tone dialing feature for a special service, you can store a pulse/tone mixed number (up to 20 digits) in the memory. 1 2 3 Press MEMORY. Enter the phone number you want to store (up to 20 digits) . If no key is pressed for 20 seconds after step 1, operation is cancelled and a beep sounds. Press MEMORY and enter a number (0­9) for the memory location you want to use. You hear a long beep and the TALK/BATT LOW indicator goes out indicating the number has been stored successfully. If you select any keys other than 0­9 the handset will beep rapidly and no number will be stored. 1 2 3 4 5 Press MEMORY. Enter the number to be dialed in pulse mode. Enter the number to be dialed in tone mode. · You may have gone too far from the base. · Press SCAN to search for clearer reception. · · · · Check both ends of the telephone line cord. Make sure the AC adaptor is plugged into the base and a wall outlet. Disconnect the AC adaptor for a few minutes, then reconnect it. Reset the security code by placing the handset back on the base for a few seconds. The CHARGE/IN USE indicator will blink indicating that the phone has been reset. Can't make or receive calls. Handset doesn't ring or receive a page. · The Nickel-Cadmium battery pack may be weak. · The handset may be too far away from the base. · Place the base away from appliances or metal objects. · Reset the security code by placing the handset back on the charging cradle for a few seconds. The CHARGE/IN USE indicator will blink indicating that the phone has been reset. E8 CLT2410 (SANYO) A5 2nd 7/18/00 6:41 PM Page 10 Technical Information REN Number: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. [. . . ] Simply call toll free from anywhere in Canada to connect to our no-charge, SOS support and service network. 1-800-263-2244 between 10:00 AM ­ 7:00 PM EST Stay-At-Home Convenience It's a nuisance making another trip to the store when you're stuck. Now with SOS, all that's necessary is a quick call from your home for product assistance or exchange. SOS ­ it's the ultimate in convenience. Hassle-Free Exchange Should your Sanyo telephone/telephone with answering system require servicing during the warranty period, SOS will have a free replacement unit at your door within 48 hours. * For security reasons, you will be asked to give us your credit card number (VISA or MasterCard). Guaranteed Quality All SOS replacement sets are checked and serviced by factory-authorized technicians before being sent out. [. . . ]