User manual SANYO DCS-TS750

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. [. . . ] As both images and audio will be stored in the normal recording area, this area's overall capacity will reduce accordingly. 7 Press the [ ] button after moving the cursor to "REC RATE". And press the [ ] or [ ] button to change the setting, then press the [ ] button. 5 Press the [ ] button after moving the cursor to "FRAME/FIELD RECORDING". And press the [ ] or [ ] button to change the setting, then press the [ ] button. (Example: 7. 50) The recording time depends on the combined setting of "PICTURE QUALITY" and "REC RATE". For more details, see "Table of recording rate and times" ( P. 46). 8 English Press the [EXIT/OSD] button. The display returns to the normal screen. 59 6 TIMER SET <MAIN MENU 1> [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button You can set recording start/stop times using the timer function. (6) Used for timer recording settings of over 24 hours Use these lines for timer recording spanning more than 24 hours. Timer setting items SETTINGS <MAIN MENU 1> You can set times at which to start and stop recording on each specified day of the week in addition to the corresponding recording rate. (3) (2) (1) (4) (5) The setting values from <NORMAL REC MODE SET> are adopted for the picture quality, frame/field recording, and audio recording for timer recording. 59) Making timer reservations every day at the same time with the same image quality Example: Making a timer recording every day from 8:30 to 18:30 with the same recording rate (6) (1) WEEK Used to select the days of the week for timer settings. When each day in the "WEEK" column is flashing, it can be set to other days. The 7th line (default: "SAT") and 8th line (default: "DLY") are used for timer recording settings of over 24 hours. (2) START Enter the time at which to start timer recording. (3) STOP Enter the time at which to stop timer recording. Press the [ ] or [ ] button to set "--" to "11". Press the [ ] button to make "--" (the day) flash. Press the [ ] or [ ] button to set "--" to "17". Day Month No. 4 5 Example: To set November 17 as a holiday After entering the setting, press the [ ] button. The cursor moves to "2". Repeat procedures 3 and 4 to set other holidays as needed. Press the [EXIT/OSD] button. 1 2 Press the [MENU] button. 6 7 The <MAIN MENU 1> screen appears. The display returns to the normal screen. Press the [ ] or [ ] button to select "7. HOLIDAY SET" and press the [ ] button. Press the [TIMER] button. The TIMER indicator lights, and the recorder enters timer recording standby mode. The <HOLIDAY SET> screen is displayed, with the cursor positioned on "1". English 63 8 \ ALARM REC MODE SET <MAIN MENU 1> [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button Setting alarm recording Follow the procedures below to select the recording picture quality, recording method (i. e. , frame or field), audio recording, and recording rate for the alarm recording area. 5 Move the cursor to "FRAME/FIELD RECORDING" and press the [ ] button, then press the [ ] or [ ] button to change the setting. SETTINGS <MAIN MENU 1> 1 2 Press the [MENU] button. The <MAIN MENU 1> screen appears. Select "8. ALARM REC MODE SET" and press the [ ] button. [Settings] ( Setting FIELD FRAME The <ALARM REC MODE SET> screen appears. indicates default setting. ) Description Sets the recording method to field. Sets the recording method to frame. 6 3 4 Press the [ ] button. Move the cursor to "AUDIO RECORDING" and press the [ ] button, then press the [ ] or [ ] button to change the setting. "ENHANCED" flashes. Press the [ ] or [ ] button to select the picture quality. indicates default setting. ) Description Super Fine: 50 kB Fine: 42 kB Enhanced: 30 kB Normal: 22 kB Basic: 15 kB When this is set to "ON", the letter "A (indicating that audio will be recorded)" is displayed in front of "REC RATE", and the maximum number of images that can be recorded is displayed at the bottom of the screen. [Settings] ( Setting SUPER FINE FINE ENHANCED NORMAL BASIC 64 English 8 ALARM REC MODE SET [Settings] ( Setting OFF ON indicates default setting. ) Description Audio recording is not carried out Audio recording is carried out [Settings] Setting Description 60. 00 to 0. 03 FPS (for field recording) 30. 00 to 0. 02 FPS (for frame recording) 1 second to 15 minutes, *CC Sets the recording rate. Sets the recording time per alarm. REC RATE [Setting conditions] This can be set whenever the recording rate is 10. 00 FPS or more for field recording, or 5. 00 FPS or more for frame recording. DURATION *CC: Operates while an alarm is being activated. 7 Move the cursor to "ALARM RECORDING" and press the [ ] button, then press the [ ] or [ ] button to change the setting. When alarm recording settings have been completed Press the [EXIT/OSD] button. The display returns to the normal screen. "ALARM" appears in the operation display area. When an alarm occurs, the number of alarms is displayed. Number of alarm recordings Alarm display [Settings] ( Setting OFF ENABLED indicates default setting. ) Description Does not perform alarm recording. [. . . ] The main window will then be printed with the time stamp embedded in the image. 2 To print thumbnail images The title entered will appear underneath the printed image. Up to 10 entered titles can be saved and selected from a list. Click the thumbnail image to be printed so that it appears in blue, and then repeat procedure 1 above. 11/05/2004 18:56:10 3 To print several images all at once Hold down the [Ctrl] key on the keyboard, and then click on the images to be printed in the thumbnail window to select them. To select a contiguous range of images, hold down the [Ctrl] key and the [Shift] key simultaneously and then select the images. After selecting the images to be printed, carry out procedure 1 above. [. . . ]