User manual SANYO DP747460

[. . . ] Este manual le indica las conexiones básicas y las instrucciones de funcionamiento de dos modelos (Color MPX-CD4, Blanco y negro DP747460). À propos de ce manuel · Avant d'installer et d'utiliser cet appareil, veuillez lire ce · manuel attentivement. Assurez-vous de le garder à portée de la main pour référence ultérieure. Ce manuel couvre les instructions de branchement et d'utilisation de base pour deux modèles (couleur MPX-CD4, noir et blanc DP747460). PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Declaration of Conformity MPX-CD4/ DP747460 SANYO SANYO FISHER COMPANY 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 · This device complies with Part 15 of the FCC Rules. [. . . ] (See example 7 on page 19) To cancel the zoomed in image display mode Press the ZOOM button. "Z" is erased and the normal display mode returns. Z 2 ZOOM 18 English FULL SCREEN OPERATIONS (VCR playback on monitor 1) Example 7: To zoom in the recorded image from camera 4 and set the zoom range 1 2 04 4 Z ZOOM You can select the portion of the recorded image to zoom in. The default zoomed in area is the centre of the image, but if a different zoom range is selected it will be memorized until changed or cancelled. 1 2 Press the camera select 4 button. The camera 4 indicator lights, the recorded image from camera 4 is displayed. The ZOOM indicator flashes, the recorded image from camera 4 is zoomed in, and "Z" flashes on-screen. Press the camera select 4 button for about 3 seconds. The zoomed in image will switch to the normal display mode, and the zoom range frame is displayed. NOTE: If during the zoom range setting, the frame displayed is not moved for about 10 seconds, the display mode will automatically return to zoomed in display mode. To return to the setting mode, press the camera select 4 button again, for about 3 seconds. Press the c (or l) button to move the zoom range frame to the desired area of the image. The area selected by the zoom range frame is now zoomed in. Menu: 1ST, 2ND, 3RD, 4TH or LST (first, second, third, fourth or last) 2 Press the + (or ­) button to set the WEEK (TUE), then press the c button. Menu: SUN, MON, TUE, WED, THU, FRI, SAT or SUN 3 Press the + (or ­) button to set the MON (05), then press the c button. 11, 12 (for January, February, March . . . . . December) 4 Press the + (or ­) button to set the TIME (03), then press the c button. · Following the same procedure as above, set when the time is changed back from daylight saving time to standard time (the OFF settings). 1 2 Press the MENU button 2 times to display the (CLOCK SET) menu. Example: Setting the clock to October 15, 1999 at 3:20 PM 1 Press the + (or ­) button to set the month (10), then press the c button. 2 Press the + (or ­) button to set the day (15), then press the c button. 3 Press the + (or ­) button to set the year (1999), then press the c button. 4 Press the + (or ­) button to set the hours (15), then press the c button. 5 Press the + (or ­) button to set the minutes (20), then press the c button. NOTE: The day of the week (SAT) will be automatically set according to the date entered. 3 Press the l button to go to the (DAYLIGHT SET). [. . . ] Then, the alarm information is sent in a 1-byte transmission (see Table 3). ALARM information (Table 3) Bit 7 Alarm information 6 indication 5 4 3 2 1 0 Reserved Reserved Camera number indication Bit state information 01: External 10: Video loss 11: Sensor alarm 0 0 0011: CAMERA NO. 1 OTHER COMMANDS ENTER(40) When numeric commands are all sent, this command is used to enter the transmitted value. CLEAR(56) To erase multiple byte commands. English 37 RS232C CONTROL COMMAND TABLE (TABLE 4) The commands available are indicated in the table. If a function is not available on the unit, the command will not operate even if sent. 0 0 1 2 3 4 5 6 7 8 9 A B C D E F ACK NAK 1 2 3 0 1 2 3 4 5 6 7 8 9 SECURITY LOCK ON SECURITY LOCK OFF (POWER ON/OFF) (SET ON) (SET OFF) CLEAR » 1 « O + ­ VERSION SHIFT MENU NEXT EXIT 4 ENTER 5 6 7 8 LIVE VCR PB (MULTI) QUAD PLUS ZOOM STILL SEQ. MON 2 9 FULL 1 FULL 2 FULL 3 FULL 4 A 0 1 2 3 4 5 6 7 8 9 A B C D E F B C D E CLK. [. . . ]