User manual SANYO DS32224

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. WARNING: Unauthorized recording or use of television broadcast, video tape, film or other copyrighted material may violate applicable copyright laws. The manufacturer assumes no responsibility for unauthorized duplication, use or other acts that infringe upon the rights of copyright owners. CAUTION: To prevent electric shock, match wide blade of plug to wide slot of electrical outlet and insert fully. CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this VCR. Declaration of Conformity Model Number Trade Name Responsible party Address Telephone No. [. . . ] oe Date March 7: Year '00: Time 9:30: Select standard (or daylight saving time): PM: Press 0 ­ 3 ­ 0 ­ 7 Press 0 ­ 0 Press 0 ­ 9 ­ 3 ­ 0 Press CH/TRACK l or j Press 100/ENTER @Clock@set @03/07[Tue]2000@09:30PM [CH§]Day/STD@shift [100]AM/PM [CLEAR]Cancel [SET]OK NOTES: oe When entering the year, press the two number buttons that correspond to the last two digits of the year (i. e. 99 for 1999, 05 for 2005 or 25 for 2025). oe If you press the wrong button, press the CLEAR button to erase the wrong number. Then press the correct button to continue. 5 When finished, press the SET button to save the settings. 21 SU4/UF2 (DS32224 GB) Tue. 09/1999 CHANGING THE MENU LANGUAGE English, Spanish or French can be selected by the user. 1 Press the MENU button. The main MENU appears. Before starting oe Turn on the power (TV and VCR). oe Press the VCR button on the remote control to select the VCR operation mode. oe If the VCR indicator is off, press the TV/VCR button on the remote control. 2 Press the CH/TRACK l (or j) button to select the Language select option, then press the SET button. 3 Press the CH/TRACK l (or j) button to select the language of your choice, then press the SET button. The Language select menu disappears, and the on-screen menu language has been selected. The VCR indicator lights. PROGRAMMING CHANNELS BASIC OPERATION Once the initial setup is completed, the channels can be programmed again. This may be necessary if you are switching from cable service to antenna reception. 4 Press the CH/TRACK l (or j) button to select the CATV/TV option, then press the SET button to select "CATV" (if you subscribe to a cable TV service) or "TV" (for normal broadcast reception through an antenna). NOTES: oe Make sure the antenna or cable connections are correct. (See pages 11 and 12. ) oe If the input source is set to L1, press the INPUT button on the remote control until the indicator panel shows a channel number. The CATV indicator "C" displayed on the indicator panel means that the cable TV system is selected. 5 Press the MENU button twice. The main MENU appears. 6 Press the CH/TRACK l (or j) button to select the Channel Programming 1 Follow the steps in Before starting above. 2 Press the MENU button. The main MENU appears. Auto tuning memory option, then press the SET button. The VCR programs all unscrambled channels that are available in your area into the tuner memory. The VCR will automatically adjust the tracking for the optimum results. If noise still appears: MANUAL TRACKING CONTROL 1 Press the VCR button on the remote control to select the VCR operation mode. 2 Press and hold the CH/TRACK l or j button (or CHANNEL on the front panel) during playback to eliminate the noise streaks from the picture. The automatic tracking control mode is canceled. To return to automatic tracking, eject the cassette, then reinsert it. 24 SU4/UF2 (DS32224 GB) Tue. 09/1999 RECORDING Before starting oe Turn on the power (TV and VCR). oe Press the VCR button on the remote control to select the VCR operation mode. oe If the VCR indicator is off, press the TV/VCR button on the remote control. Rec. List Super feature lets you keep track of all recordings you make on this VCR. The information automatically includes the channel number, date and start time. In addition you have an option to add the program type to the information list. See next page for more detailed instructions on the Rec. List Super feature. The VCR indicator lights. oe Press the INPUT button on the remote control to select the tuner mode. [. . . ] CORRECTIVE ACTION oe Connect the power cord to the AC power input socket, then to an AC wall outlet. oe The VCR is not set or the settings have been erased from the memory. Please refer to INITIAL SETUP to set the VCR. oe Place vinyl tape over the safety tab hole in the cassette. [. . . ]