User manual SANYO DSR-300

[. . . ] PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Declaration of Conformity : DSR-300 : SANYO : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Model Number Trade Name Responsible party Address CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Setting "OFF" disables the entered timer recording setting. 1 2 Press the [MENU] button. The <MAIN MENU 1> screen appears. Select "6. TIMER SET" and press the [ ] button. The <TIMER SET> screen appears. 3 Press the [ ] button. "SUN" under "WEEK" flashes. 60 English 6 TIMER SET 4 Press the [ ] or [ "SUN" to "DLY". ] button to change 6 7 When finished making the settings, press the [EXIT/OSD] button. The display returns to the normal screen. If "DLY" is set for any row, timer recording on Sundays will also be carried out in accordance with that row's settings. In other words, "DLY" includes Sundays and is given priority over other settings. Press the [TIMER] button. The TIMER indicator lights, and the recorder enters timer recording standby mode. 5 Press the [ ] button to move the cursor to the next item, then press the [ ] or [ ] button to make the required setting. To set different recording times and/or recording rate for each day of the week Set the desired recording times and recording rate for each day. Each time you press the [ ] button, the cursor moves to the following items: WEEK START time (hours, minutes) STOP time (hours, minutes) REC RATE (FPS) SET. If timer reservation days overlap The timer reservation that starts first will have priority. To cancel all set timer reservations 1 To change a displayed setting item Press the [ ] or [ ] button to move the flashing area to the item you want to change, then press the [ ] or [ ] button to change the setting. Press the [MENU] button. The <MAIN MENU 1> screen appears. 2 Select "6. TIMER SET" and press the [ ] button. The <TIMER SET> screen appears. 3 Picture quality and recording rate for timer recording The picture quality used for recording is set by "PICTURE QUALITY" in the <NORMAL REC MODE SET> screen. 59) With the <TIMER SET> screen displayed, press the [MENU RESET] button. The timer setting details will be cleared and default values will be restored. [MENU RESET] button English 61 6 TIMER SET Timer reservations spanning more than 24 hours Follow the procedures below to set timer recordings spanning more than 24 hours. These settings are made using lines 7 (default: "SAT") and 8 (default: "DLY") of the <TIMER SET> screen. Example: Timer recording from 10:30 on Monday to 20:30 on Wednesday 3 Press the [ ] or [ ] button to change the "STOP" time from "--:--" to "**:**", then press the [ ] button. The "DLY" item on the line 8 automatically changes to "TUE" (the next day on line 7) and flashes. Items that don't need to be set are displayed as asterisks (*). 1 Press the [ ] or [ ] button to move the cursor to the line 7 "SAT", then press the [ ] button. 4 Set the end "WEEK" and "STOP" time. Switch "SET" to "ON". "SAT" in the "WEEK" column flashes. You can change the setting of the flashing item. (1) (2) (3) (4) (5) SETTINGS <MAIN MENU 1> Line 7 2 Set the items in the "WEEK" and "START" columns. (1) Press the [ ] or [ ] button to change "TUE" to "WED", then press the [ ] button. (2) Press the [ ] or [ ] button to change "--" to "20", then press the [ ] button. (3) Press the [ ] or [ ] button to change "--" to "30", then press the [ ] button. (4) Press the [ ] or [ ] button to set "REC RATE". (5) Press the [ ] or [ ] button to change "OFF" to "ON". 5 6 Press the [EXIT/OSD] button. (1) Press the [ ] or [ ] button to change "SAT" to "MON", then press the [ ] button. The display returns to the normal screen. Press the [TIMER] button. (2) Press the [ ] or [ ] button to change "--" to "10", then press the [ ] button. The TIMER indicator lights, and the recorder enters timer recording standby mode. (3) Press the [ ] or [ ] button to change "--" to "30", then press the [ ] button. 62 English 7 HOLIDAY SET <MAIN MENU 1> [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button You can set specific dates as holidays to have the operation for Sunday used on those days also. Dates such as national holidays and company off days should be set as holidays when you want those dates to have the same security as Sundays. [Setting conditions] After completing timer settings for Sunday "SUN", make sure to switch "SET" to "ON". 60) 3 (1) (2) (3) (4) Set the month and day in item No. 1. Press the [ ] button to make "--" (the month) flash. Press the [ ] or [ ] button to set "--" to "11". Press the [ ] button to make "--" (the day) flash. Press the [ ] or [ ] button to set "--" to "17". Day Month No. 4 5 Example: To set November 17 as a holiday After entering the setting, press the [ ] button. The cursor moves to "2". Repeat procedures 3 and 4 to set other holidays as needed. Press the [EXIT/OSD] button. 1 2 Press the [MENU] button. 6 7 The <MAIN MENU 1> screen appears. The display returns to the normal screen. Press the [ ] or [ ] button to select "7. [. . . ] The selected images will then be printed one by one. NETWORK OPERATION 11/05/2004 18:56:10 130 English 6 (when optional interface board is installed) DVR VIEWER Saving images In the case of images on a CD-R, the control panel includes buttons that can be used for saving images, so that images can be saved on another storage medium as described below. You can specify an existing folder to use or create a new folder, and you can also set your own filenames for the files being saved. 3 Specify the saving destination and the filename, and then click [Save]. The specified images will then be saved. The filenames for each image will be generated automatically based on the number of images being copied and the filename you entered. 1 Specify the start image and end image to be saved. Click [Set Copy Start image] and then use playback operations to select the start image. Then when playback is stopped, click [Set Copy End image] to set the starting point for the images to be copied using the image numbers. [. . . ]