User manual SANYO DSR-3009

[. . . ] INSTRUCTION MANUAL Digital Video Recorder with Multiplexer Function DSR-3016 DSR-3009 DSR-3016 DSR-3009 About this manual Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Declaration of Conformity DSR-3016, DSR-3009 SANYO SANYO FISHER COMPANY 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 · This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] (See page ??. ) WEEK SUN MON THE WED THU FRI SAT DLY START 08:00 08:00 08:00 08:00 08:00 08:00 --:---:-<TIMER SET> STOP PROGRAM 18:00 OFF 18:00 OFF 18:00 OFF 18:00 OFF 18:00 OFF 18:00 OFF --:-- ---:-- -FPS 10FPS 10FPS 10FPS 10FPS 10FPS 10FPS 10FPS 10FPS SET OFF ON ON ON ON OFF OFF OFF Example: To set 17 November as a holiday MENU 1. <HOLIDAY ----------------------------------------SET> 11. ----------------------------------------- 1 Turn the jog dial to move the cursor to the SEQUENCE setting in the SELECT WEEK OF TIME PERIOD menu, and then turn the shuttle dial clockwise. The cursor moves to TIME PERIOD A. 2 Turn the jog dial to change the setting to " TIME PERIOD A" (TIME PERIOD A setting), and then turn the shuttle dial clockwise. The cursor moves to MASK. 1 Press the MENU button to select INITIAL SET, and then turn the shuttle dial clockwise. The INITIAL SET sub-menu appears, and the cursor is positioned at LANGUAGE/CLOCK SET. 3 Turn the shuttle dial clockwise to move the cursor to " TIME PERIOD A" , use the jog dial to change the MASK setting to " TIME PERIOD A" (TIME PERIOD A setting), and then turn the shuttle dial clockwise. The cursor moves to MOTION. 2 Use the jog dial to move the cursor to HOLIDAY SET, and then turn the shuttle dial clockwise. The HOLIDAY SET sub-menu appears. 4 Turn the shuttle dial clockwise to move the cursor to " TIME PERIOD A" , and then use the jog dial to change the MOTION setting to " TIME PERIOD B" (TIME PERIOD B setting). SELECT WEEK OF TIME PERIOD SEQUENCE TIME PERIOD A MASK TIME PERIOD A MOTION TIME PERIOD B 3 Turn the shuttle dial clockwise. "­ ­ " (month) flashes in the line 1. 1. ----- 4 Use the jog dial to change from "­ the shuttle dial clockwise. "­ ­ " (day) flashes in the line 1. ­" to " 11" , and then turn 5 Press the EXIT/OSD button. This completes the timer setting. The display returns to the normal screen. EXIT/OSD 1. 11--- 5 Use the jog dial to change from "­ the shuttle dial clockwise. The cursor moves to the line 2. ­" to " 17" , and then turn 1. ----- 6 Follow the same procedure to set other holiday dates. 7 Press the EXIT/OSD button. The display returns to the normal screen. EXIT/OSD 48 English INITIAL SET MENU D Automatic camera detection This automatically detects the cameras that are connected to the digital video recorder and changes all settings for cameras that are not connected to "OFF". MENU <INITIAL SET> 1. LANGUAGE/CLOCK SET 2. TIME PERIOD SET 3. HOLIDAY SET 4. CAMERA DETECT -> -> -> -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE 1 Press the MENU button to display the INITIAL SET menu screen, and then turn the shuttle dial clockwise. The INITIAL SET sub-menu appears, and the cursor moves to LANGUAGE/CLOCK SET. 2 Use the jog dial to move the cursor to CAMERA DETECT, and then turn the shuttle dial clockwise. All cameras that are connected to the digital video recorder are detected, and the settings for any unconnected cameras are changed to "OFF". English 49 RECORDING SETTING Main manu <MAIN MENU> 1. INITIAL SET 2. RECORD SET 3. GENERAL SET 4. SCREEN SET 5. POWER FAILURE/USED TIME 6. COPY MENU SETTINGS -> -> -> -> -> -> A RECORDING AREA SET menu <RECORDING AREA SET> TOTAL CAPACITY NORMAL RECORDING AREA AREA FULL RESET -> ALARM RECORDING AREA AREA FULL RESET -> ARCHIVE AREA AREA FULL RESET -> : : : : 80GB 80 % 19 % 1% Displays the total capacity of the hard disk. Sets the capacity of the normal recording area. Normal recording area CAUTION : WHEN THE AREA SETTING IS CHANGED, THE WHOLE AREA WILL BE INITIALIZED ! MOVE LINES WITH JOG, SELECT WITH SHUTTLE B RECORDING CONDITIONS SET menu <RECORDING CONDITIONS SET> DIGITAL SERIES RECORDING : OFF TOTAL NUMBER :1 NORMAL RECORDING AREA OVERWRITE ALARM RECORDING AREA OVERWRITE REMAINING DISK WARNING Sets the capacity of the archive recording area. Archive recording area Sets the capacity of the alarm recording area. Alarm recording area : OFF : OFF : 1% <RECORD SET> 1. RECORDING AREA SET -> 2. RECORDING CONDITIONS SET -> 3. NORMAL REC MODE SET -> 4. PROGRAM REC SET -> 5. TIMER SET -> 6. ALARM REC MODE SET -> 7. ALARM OPERATION SET -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE Changes the settings for connections when more than one (maximum of 2) digital video recorder is connected together for series recording. Changes the overwriting setting for the normal recording area. Changes the overwriting setting for the alarm recording area. Changes the warning settings for the remaining recording area. Changes the image quality settings. C NORMAL REC MODE SET menu <NORMAL REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF REC RATE : 30FPS ( 18H) REC CAMERA GROUP : OFF D PROGRAM 1 SET MENU menu <PROGRAM REC SET> P-1 SELECT INDIVIDUAL CAMERA RATE(FPS) 01:0. 313 02:0. 313 03:0. 313 04:0. 313 05:0. 313 06:0. 313 07:0. 313 08:0. 313 09:0. 313 10:0. 313 11:0. 313 12:0. 313 13:0. 313 14:0. 313 15:0. 313 16:0. 313 NORMAL REC: 23H ALARM REC : 01360 Changes the audio recording settings. Changes the recording cycle (recording speed) settings. [. . . ] See Table 4 - Command Table on page 71. RS485 TERMINATE ON OFF Digital video recorder RS-485 Data format Mode Character length Data transmit speed Parity Stop bit Asynchronous 8 bits 2400, 4800, 9600, 19200 bps None 1 Communication protocol A proprietary Sanyo protocol (SSP: Security Serial Protocol) is used. It is recommended that a special controller be used. Contact the place of purchase for further details on obtaining a special controller. English 91 INTERFACE SPECIFICATIONS Command Table (Table 4) The following table shows all of the commands that can be processed by the digital video recorder. If a command sent does not correspond to a digital video recorder function, the command is received but no operation is carried out. Upper bit Lower bit 0 1 2 3 4 5 6 TIMER ON/OFF 7 0 1 2 3 4 5 6 7 8 9 A B C D E F STOP STILL ACK NAK PLAY REV PLAY/ SEARCH (DVR) SHIFT SHIFT SHIFT SHIFT SHIFT+ /RP UP SHIFT­ /RP DOWN MENU SECURITY LOCK ON GROUP SET GROUP CHECK GROUP CLEAR Upper bit Lower bit 8 9 A B C D E CLOCK ADJUST MENU RESET F 0 1 2 3 4 5 6 7 8 9 A B C D E F : Command for RS-485 only. [. . . ]