User manual SANYO DSR-3716HXXXC

[. . . ] Refer to the included CD-ROM for the French and Spanish "INSTRUCTION MANUAL". Utilisez le CD-ROM fourni pour consulter le "MANUEL D'INSTRUCTIONS" en français et en espagnol. Consulte en el CD-ROM el "MANUAL DE INSTRUCCIONES" en francés y en español. PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Declaration of Conformity : DSR-3716/3709 : SANYO : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 Telephone No. : (818) 998-7322 This device complies with Part 15 of the FCC Rules. [. . . ] 2, 4, 5, 7, 10 and 16 are masked. 01 05 09 13 02 06 10 14 03 07 11 15 04 08 12 16 01: 05: 09: 13: 1S 1S 1S 1S INDIVIDUAL INTERVAL (SEC) 02: 1S 03: 1S 04: 06: 1S 07: 1S 08: 10: 1S 11: 1S 12: 14: 1S 15: 1S 16: 1S 1S 1S 1S Masking camera video using a gray pattern Use "3. MASK SET" from <SCREEN SET> to specify which cameras are to be displayed on the monitor and which are not. ( P. 104) <MASK SET> TIME CH MAIN MON. MON. 2 NETWORK PERIOD : 01 02 OFF OFF OFF OFF OFF OFF 09 10 OFF OFF OFF OFF OFF OFF T-1 03 OFF OFF OFF 11 OFF OFF OFF (06:00-11:30) 04 05 06 07 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 13 14 15 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Lunchtime: 11:00 to 13:00 Cameras No. 1, 4, 6, 11, 12, 13 and 14 are masked. 01 05 09 13 02 06 10 14 03 07 11 15 04 08 12 16 16 08 OFF OFF OFF 16 OFF OFF OFF Lunchtime to night: 13:00 to 20:00 Cameras No. 1, 5, 9, 12 automatic selection is carried out. Alarm recording using motion sensors Alarm recording is activated by motion sensor. To detect camera alarms, set "MOTION SENSOR" from <ALARM REC MODE SET>. ( P. 81) 01 05 09 12 Night to morning: 20:00 to 6:00 Cameras No. 1, 8 and 16 automatic selection is carried out. CH01 T-1 LEVEL : OFF MODE : A 01 08 16 English 57 2 INITIAL SET Time period settings Example 1: Setting periods using TIME PERIOD A and TIME PERIOD B TIME PERIOD A settings Set T-1 to 6 AM (6:00) Set T-2 to 11:30 AM (11:30) Set T-3 to 1:30 PM (13:30) Set T-4 to 6 PM (18:00) TIME PERIOD B settings Set T-1 to 6 AM (6:00) Set T-2 to 8 AM (8:00) Set T-3 to 2:30 PM (14:30) Set T-4 to 8 PM (20:00) 3 Turn the jog dial to select "5. TIME PERIOD SET", and then turn the shuttle dial clockwise. The <TIME PERIOD SET> screen is displayed. <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 00:00 00:00 00:00 00:00 TIME PERIOD B 00:00 00:00 00:00 00:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR TIME PERIOD A TIME PERIOD A TIME PERIOD A 4 "T-1" to "T-4" sets the start time of interval. <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 00:00 00:00 00:00 00:00 TIME PERIOD B 00:00 00:00 00:00 00:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR Turn the jog dial to select "TIME PERIOD A", and then turn the shuttle dial clockwise. SETTINGS "00:" from T-1 flashes (indicating the hour). <TIMER PERIOD SET> K TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 00:00 00:00 00:00 00:00 TIME PERIOD B 00:00 00:00 00:00 00:00 TIME PERIOD A TIME PERIOD A TIME PERIOD A 5 Set T-1 (indicating the hour) to "06" with the jog dial or numeric keys and turn the shuttle dial clockwise. ":00" from T-1 flashes (indicating the minutes). 1 Press the [MENU] button. 6 The MENU indicator lights up and the <MAIN MENU> is displayed. MENU Set T-1 (indicating the minutes) to "00" with the jog dial or numeric keys and turn the shuttle dial clockwise. "00:" from T-2 flashes (indicating the hour). 7 2 Turn the jog dial to select "1. INITIAL SET", and then turn the shuttle dial clockwise. Set T-2 (indicating the hour) to "11" with the jog dial or numeric keys and turn the shuttle dial clockwise. ":00" from T-2 flashes (indicating the minutes). <TIMER PERIOD SET> K TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 06:00 00:00 00:00 00:00 TIME PERIOD B 00:00 00:00 00:00 00:00 The <INITIAL SET> screen is displayed. <INITIAL SET> 1. LAUNGUAGE/CLOCK SET 2. CAMERA DETECT 3. TITLE SET 4. HOLIDAY SET 5. TIME PERIOD SET -> -> -> -> -> 8 Set T-2 (indicating the minutes) to "30" with the jog dial or numeric keys and turn the shuttle dial clockwise. MOVE:JOG SELECT:SHUTTLE "00:" from T-3 flashes (indicating the hour). Repeat steps 4 through 7 to make hour and minute settings for T-3 and T-4. 58 English 2 INITIAL SET 9 In the same manner as described set the hours and minutes of T-1, T-2, T-3, and T-4 for "TIME PERIOD B" settings. <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 06:00 11:30 13:30 18:00 TIME PERIOD B 06:00 08:00 14:30 20:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR 1 Turn the jog dial to move the cursor to "SEQUENCE" within "SELECT TIME PERIOD", and then turn the shuttle dial clockwise. "TIME PERIOD A" flashes. TIME PERIOD A TIME PERIOD A TIME PERIOD A For both TIME PERIOD A and TIME PERIOD B, all settings are "00:00" by default. 2 Turn the jog dial to select "TIME PERIOD A", and then turn the shuttle dial clockwise. The cursor moves to "MASK". Settings for T-1 through T-4 cannot be made in such a way that they extend over two days (i. e. , include midnight). Example: T-1 T-2 T-3 T-4 06:00 12:00 18:00 02:00 In the above example, setting is not possible between T-3 and T-4 due to the change in the date. Any setting of "00:00" for T-2 through T-4 will be skipped. If "00:00" (midnight) must be set, this should be done using T-1. Example: T-1 T-2 T-3 T-4 06:00 12:00 18:00 00:00 In the above example, T-4 (00:00) is skipped and T-3 operates between 18:00 and 06:00. Furthermore, when T-1 through T-4 are all set to "00:00", all but T-1 are ignored, and T-1 operates from midnight to midnight. <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 06:00 11:30 13:30 18:00 TIME PERIOD B 06:00 08:00 14:30 20:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR TIME PERIOD A TIME PERIOD A TIME PERIOD A 3 4 Set the time period for "MASK" and "MOTION SENSOR" in the same way. Press the [EXIT/OSD] button. The setting procedure is ended and the display returns to the normal screen. Automatic selection, masking, and motion sensors are all set to "TIME PERIOD A" by default. EXIT/OSD Time period operations settings Example 2: Setting time period operation as follows. Automatic selection and monitor masking for "TIME PERIOD A". Motion sensing for "TIME PERIOD B". <TIMER PERIOD SET> TIME PERIOD T-1 T-2 T-3 T-4 TIME PERIOD A 06:00 11:30 13:30 18:00 TIME PERIOD B 06:00 08:00 14:30 20:00 SELECT TIME PERIOD SEQUENCE MASK MOTION SENSOR TIME PERIOD A TIME PERIOD A TIME PERIOD A As a result of the above operations, "SEQUENCE" are updated using main monitor and monitor 2 settings on P. 102; "MASK" are updated using mask settings from on P. 104; and "MOTION SENSOR" are updated using motion sensor settings on P. 81. English 59 3 RECORD SET Main Menu <MAIN MENU> 1. INITIAL SET 2. RECORD SET 3. GENERAL SET 4. SCREEN SET 5. POWER LOSS/USED TIME 6. INITIALIZATION LOG 7. COPY MENU SETTINGS -> -> -> -> -> -> -> FULL indicator ALARM FULL indicator [EXIT/OSD] button [MENU] button Shuttle dial CARD MOVE:JOG SELECT:SHUTTLE MENU RESET EJECT [CAMERA SELECT] buttons [TIMER] button Jog dial Setting WEEK SUN MON TUE WED THU FRI SAT DLY EXT START --:---:---:---:---:---:---:---:-***** <TIMER SET> STOP PROGRAM --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF --:-OFF ***** OFF FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS 15 FPS SET OFF OFF OFF OFF OFF OFF OFF OFF OFF Settings for recording The <RECORD SET> is used to make the following settings. 6 <RECORD SET> 1. NORMAL REC EASY SET 2. RECORDING AREA SET 3. RECORDING CONDITIONS SET 4. NORMAL REC MODE SET 5. PROGRAM REC SET 6. TIMER SET 7. ALARM REC MODE SET 8. ALARM OPERATION SET MOVE:JOG -> -> -> -> -> -> -> -> Description <TIMER SET> Makes timer settings so that operations can be started at a specified time or on a specified day. Ref P. 74 SETTINGS 7 SELECT:SHUTTLE <ALARM REC MODE SET> ALARM RECORDING : OFF PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF ALARM INTERLEAVE : ONLY REC RATE: 15FPS, DURATION: 20SEC PRE-ALARM RECORDING : *** REC RATE: **** FPS, DURATION: **** => (01731 ALARMS CAN BE RECORDED) ALARM TRIGGER : ALARM MOTION SENSOR -> <ALARM REC MODE SET> Sets alarm recording, prealarm recording, and motion sensors. P. 77 Setting <NORMAL REC EASY SET> RECORDING DURATION BASE -> -> Description Ref 8 <ALARM OPERATION SET> ALARM RETRIGGER : OFF MAIN MON. DISPLAY ALARM PRIORITY MON. 2 DISPLAY : NC : LAST : OFF 1 REC RATE BASE CAUTION ! [. . . ] 92 I INITIAL SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 INITIALIZATION LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Initializing the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 IP ADDRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]