User manual SANYO DTA1800 INSTRUCTION MANUAL

[. . . ] DTA-1800-Efinal 9/30/02 11:54 AM Page 1 Desktop Audio System with Under-Cupboard and Wall Mounting Option Instruction Manual DTA-1800 SANYO Canada Inc. c o m DTA-1800-Efinal 9/30/02 11:54 AM Page 2 TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS . . 10 Battery installation Controls BASIC OPERATION . . 12 Power on/off Volume control Muting function Switching the display CLOCK/TIMER . [. . . ] Press the button once more to set the volume to the original level. NOTE: · Vol 0 is indicated for 1 second, and then it returns to the original display. · Vol 0 will appear once every 4 seconds 2. Press either TUNER/BAND to play the radio or CD to play a CD. Example: FM mode SWITCHING THE DISPLAY The display is multi-functional and shows a variety of information. To turn the power off, press POWER on the remote or STANDBY on the unit. Power off mode: Clock Timer On Timer Off Setting Setting button to toggle the NOTE: Please turn off the unit before disconnecting the main power supply. CD mode: Playing Remaining Clock Timer On Timer Off Time Time Setting Setting VOLUME CONTROL TUNER mode: Tuner Clock display Timer On Timer Off Display Setting Setting 1. Press VOL-DOWN (­) to reduce the volume; the volume level will be shown in the LCD display. Press VOL-UP (+) to increase the volume. Hold down the button for a continuous increase or decrease in the volume. 2. 3. Timer Status Clock 12 DTA-1800-Efinal 9/30/02 11:55 AM Page 13 CLOCK/TIMER SETTING THE CLOCK When the unit is first connected to the supplied AC adapter, the display shows AM 12:00. To set the clock to the correct time, proceed as follows. Please note: proceed to the next step within 5 seconds or the system reverts automatically to step 1. With the unit turned off, press MEMOR Y once, and the hour digits flash. WAKE TIMER ON/OFF SETTING NOTE: Set the clock before setting the Wake Timer TIMER ON (wake-up time) Setting Example: You wish to set the unit to come on at 7:30: 1. Press MODE/CLOCK until the TIMER ON indicator in the upper left of the display flashes. 2. Press MEMOR Y once, and the hour digits flash. 2. Press the CD SKIP f or e buttons to adjust the hour. Be sure to set the hour correctly for AM or PM. 3. Press the CD SKIP f or e buttons to set the hour to 7:00. Be sure to set the hour correctly for AM or PM. 3. Press MEMOR Y again, and the minute digits flash. Press CD SKIP f or e to adjust the minutes. Press MEMOR Y once more; the display stops flashing and the clock has been set. 4. 4. Press MEMOR Y again, and the minute digits flash. 5. 5. Press the CD SKIP f or e buttons to set the minutes to 30. 13 DTA-1800-Efinal 9/30/02 11:55 AM Page 14 CLOCK/TIMER 6. Press MEMOR Y button once more, and the TIMER ON has been set. The ON indicator stops flashing to confirm that the setting has been made. Press the CD SKIP forward or backward buttons to set the minutes to 30. 6. To cancel the Timer On setting: Press MODE/CLOCK several times until TIMER is flashing and ON is not. Then press WAKE TIMER until TIMER ON is flashing. TIMER OFF (shut-off time) Setting Example: You wish to set the unit to shut off at 8:30 a. m. Press MODE/CLOCK once, and the TIMER OFF indicator flashes. Press MEMOR Y once more, and the TIMER OFF has been set. [. . . ] CD Player Disc does not play. CD skips while playing. Disc is inserted but skips or will not play. 20 DTA-1800-Efinal 9/30/02 11:55 AM Page 21 SANYO COMFORT WARRANTY WARRANTY APPLICATION New, unused Sanyo Audio products purchased through a Sanyo authorized dealer in Canada are warranted against manufacturing defects in materials and workmanship for ONE YEAR from the date of purchase by the original retail purchaser. This warranty only applies in favour of the original retail purchaser of the warranted product. SANYO CANADA INC. 'S RESPONSIBILITY During the warranty period, SANYO Canada Inc. [. . . ]