User manual SANYO DVC2700 INSTRUCTION MANUAL

[. . . ] INSTRUCTION MANUAL DVC-2700 English DVD Player + Video Cassette Recorder Lecteur DVD + Magnétoscope à cassette Français Only cassettes marked can be used with this DVD+VCR. As an ENERGY STAR® Partner, SANYO has determined that this product or product model meets the ENERGY STAR® guidelines for energy efficiency. Please read this manual carefully before connecting your DVD+VCR and operating it for the first time. Keep the manual in a safe place for future reference. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. [. . . ] However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to "On" for this effect. Vocal Move Select Set Vocal to "On" only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound. Dolby Digital Bitstream: Select "Bitstream" if you connected the DVD+VCR's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). PCM: Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital will be automatically downmixed to two-channel PCM audio. OTHERS The PBC and Auto Play settings can be changed. OTHERS PBC AutoPlay On Off DTS Bitstream: Select "Bitstream" if you connected the DVD+VCR's DIGITAL OUT jack to a DTS decoder (or an amplifier or other equipment with a DTS decoder). Off: If you select "Off", the DTS signal through the DIGITAL OUT jack is not outputted. Move Select PBC Set Playback Control (PBC) to "On" or "Off". On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. MPEG Bitstream: Select "MPEG" if you connected the DVD+VCR's DIGITAL OUT jack to a MPEG decoder (or an amplifier or other equipment with a MPEG decoder). PCM: Select when connected to a 2-channel digital stereo amplifier. The DVD+VCR outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the MPEG1, or MPEG2 recording system. Auto Play DVD Sample Freq. (Frequency) To change the Sample Frequency setting, first select the desired Dolby Digital, DTS, and MPEG mode as indicated as above. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz, so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit will pass through each type of signal without any further processing. You can set up the DVD+VCR so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to "On", this DVD+VCR will search the title which playback time is the longest and then play back the title automatically. On: Auto Play function is activated. Off: Auto Play function is not activated. Note The Auto Play function may not work for some DVDs. 19 PREPARATION Before Operation - DVD Part (Continued) LOCK LOCK Rating Password Country Code Unlock New CA 3 While "New" is selected, press SELECT/ENTER. 4 Enter a 4-digit password using the numbered buttons to create a personal 4-digit security password then press SELECT/ENTER. Tip If you make a mistake before pressing SELECT/ENTER, press CLEAR to delete the entered all-digit or press b to delete one by one and correct it. Move Select Rating DVD password 5 Enter the 4-digit to verify. again and press SELECT/ENTER Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Changing the 4-digit password 1 Follow Steps 1-2 as shown above (Setting your password). [. . . ] PLAY). 33 REFERENCE Plug the power cord into the wall outlet securely. Troubleshooting (Continued) Symptom Some channels are skipped over when using CH/TRK (v/V) Picture and sound of broadcasting channel are weak or missing. Cause Those channels were deleted with the CH. DVD+VCR SOURCE SELECT is not set to LINE1 or LINE2. See "Channel Selection" on page 15. [. . . ]