User manual SANYO DVDSL30

[. . . ] Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. [. . . ] If Auto Play mode is set to "On", the DVD player will find the title with the longest playback time and play it back automatically. On: Auto Play function is activated. Off: Auto Play function is not activated. ote The Auto Play function may not work for some DVDs. Sample Freq. (Frequency) To change the Sample Frequency setting, first select the desired Dolby Digital, DTS, and MPEG mode as indicated as above. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz, so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit will pass through each type of signal without any further processing. 19 PREPARATION Before Operation - DVD Part (Continued) LOCK LOCK Rating Password Country Code Unlock New US Password DVD Setting your password If you change the rating level to "7" or lower, you must enter a 4-digit "password" to prevent playback of discs with higher ratings. Move Select Rating DVD Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. 1 2 3 4 Select "Password" on the Setup menu. While "Password" is selected, press B. 1 Press SETUP to display the setup menu. 2 Use the Number buttons to enter the 6-digit number "210499". 3 Enter a new code as shown above (Setting your password). 4 Country Code DVD Enter the code of a country/area which standards were used to rate the DVD video disc, referring to the list (See "Country Code List", page 36. ). Select "Country Code" on the Setup menu. 5 1 2 3 4 5 6 While "Country Code" is selected, press B. Follow step 3 of "Rating" on left. Select the first character using the v/V buttons. Shift the cursor using B button and select the second character using v/V buttons. Press SELECT/ENTER ( ) to confirm your country code selection, then press SETUP to exit the menu. 20 Operation with tape Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV's source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Set the Output Source to VCR as shown in "Setting the Output Source" on page 6. Search This function lets you search for a desired tape section in either direction: forward or reverse quickly and visually. [. . . ] In the unlikely event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely snowy). If this is the case, use a high quality head cleaning system or have them cleaned professionally. Snowy Picture Video head cleaning Video head cleaning is needed when the playback picture becomes unclear. This signifies that the heads are getting dirty and can occur when playing poor quality or damaged tapes. [. . . ]