User manual SANYO EC-232

[. . . ] WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. Avoid places with insufficient ventilation for proper heat dissipation. [. . . ] (5) VIEW: Select this item to play back the image on the entire screen. 19 e00_l8hae_us_7. book Page 20 Thursday, April 8, 2004 11:14 AM 6 SEARCHING FOR RECORDED IMAGES 4 Press the [ ] button, and set the date/time to search. 6 Press the [ ] button to select "VIEW", then press the [ ] button. Example: To search for the image from October 26, 2004, 8:00 PM The image in the preview screen is played back on the entire screen. OPERATION 10-26-04 20:00 (1) (2) (3) (4) (5) (1) Press the [ ] or [ ] button to select "10" (October). (2) Press the [ ] button, and then the [ ] or [ ] button to select "26" (the day). (3) Press the [ ] button, then the [ ] or [ ] button to select "04" (the year). (4) Press the [ ] button, and then the [ ] or [ ] button to select "20" (the hour). (5) Press the [ ] button to select "00" (the minute), then press the [ ] button. The cursor moves to the preview. You can enter the desired date and time and select VIEW to display the retrieved image on the entire screen without showing it in the preview screen first. You can use the button operations to freeze, fastforward or perform other operations on retrieved images being played back. 5 Press the [ ] button. If no image exists for the specified time The image for the time closest to the selected time is displayed. To end search mode Press the [EXIT/OSD] button. 20 English e00_l8hae_us_7. book Page 21 Thursday, April 8, 2004 11:14 AM 7 COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTING [MENU] button [ ] button [ ] button [ ] button [EXIT/OSD] button CompactFlash card reader CompactFlash card [ ] button CD-R/RW drive CD-R/RW Use the following procedure to copy image recordings to a CompactFlash card, a CD-R/RW. CompactFlash cards and CD-RWs can also be formatted as described below. 2 Press the [ ] and [ ] buttons to select "COPY SET" and press the [ ] button. The <COPY SET> screen appears. Do not turn off the power while image is being copied. Data is written to CD-R/RWs using single-session recording. If you have already set the security lock, the password entry screen appears. ( P. 38) English 23 e00_l8hae_us_7. book Page 24 Thursday, April 8, 2004 11:14 AM MENU CONFIGURATION AND OPERATIONS This section describes the menu configuration, and which menu item to select for each operation. To exit a menu screen Displaying the menu screen and submenu screens [MENU] button [ ] button [ ] button 4 Press the [EXIT/OSD] button. The display returns to the normal screen. While recording, you can display menu screens but cannot change menu settings. Entering settings in sub-menu screens In the sub-menu screen, use the [ ] [ buttons to enter the desired setting. (2) ][ ][ ] [ ] button [EXIT/OSD] button 1 SETTINGS Press the [MENU] button. (3) (1) The <MAIN MENU> screen appears. 2 Press the [ ] or [ the desired menu. ] button to select (1) To move the cursor up/down Press the [ ] or [ ] button. (2) To move the cursor right or to a setting item Press the [ ] or [ ] button. (3) To change a setting value Press the [ ] or [ ] button. When you move the cursor, the selected item is displayed in reverse. To restore menu setting items to their initial values Follow the steps below to restore just the currently displayed menu items to their initial values. 1 2 3 Press the [ ] button. Display the desired sub-menu screen. Press the [MENU RESET] button. The displayed settings are restored to their initial values. The selected sub-menu appears. The cursor is positioned on the first setting item. [MENU RESET] button 24 English e00_l8hae_us_7. book Page 25 Thursday, April 8, 2004 11:14 AM MENU CONFIGURATION AND OPERATIONS Overview of sub-menus The screens below are the sub-menu screens displayed by selecting items from the MAIN MENU. Pressing the [MENU] button while a sub-menu screen is displayed switches the display directly to the next submenu screen. 5. SECURITY LOCK SET ( P. 36) Lets you set passwords to restrict the users. 1. LANGUAGE/CLOCK SET ( P. 26) Enables the following settings: Screen display language Date and time settings Daylight savings time settings Time synchronization with external devices 6. [. . . ] 34 [ ] (DOWN) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 DVR NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Q QUALITY/AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 E [EXIT/OSD] button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 EXT. CLOCK SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]