User manual SANYO EC505

[. . . ] Other text formats cannot be supported. Back up the data It is recommended that important data to edit with Network Viewer and store in SD memory card should be stored in other media in advance. We are not responsible for any data losses or damages resulting from use of the Memory Viewer function. Trademarks Microsoft, Windows, and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh is a registered trademark of Apple, Inc. intheUSAandothercountries. PowerPCisaregisteredtrademarkofIBMCorporation. IntelCoreis a registered trademark of Intel Corporation in the USA and other countries. Each name of corporation or product in this owner's manual is either a registered trademark or a trademark of its respective corporation. [. . . ] When you press CANCEL button in the memory viewer mode, the memory viewer browser window as shown on page 6 appears on the screen. When you remove the SD memory card during operating the projector in the memory viewer mode, the input source returns to the previous one selected just before inserting the SD memory card. Note: During accessing to the SD memory card, do not turn off the power or eject the card because the data in the card might get damaged. During accessing, the SD memory card indicator is blinking The SD memory card allows you to insert or remove regardless of the power status of the projector. The direct start-up into the memory viewer mode may not operate when the SD memory card is inserted immediately after being removed. The Network Viewer and the Moderator functions are non-Mac-compliant. 4 Entering the memory viewer mode In case of already SD memory card is inserted into the card slot on the side terminal of the projector and you want to enter the memory viewer mode again: 1. elect"Wired"or"Wireless"fromtheinputmenuoftheprojector. S * When you change input between "Wired" and "Wireless", the "Please wait. . . " message will be displayed on the screen. After short time, the network connection standby display screen "Ready for use" will appear. Wireless setting Wired setting Memory viewer 2. Select"Wiredsetting"or"Wirelesssetting"intheprojectormenu, andpressSELECT button. Select "Memory Viewer" with the point ed button and press SELECTbutton. The"Enter/Exit"pallet of the memory viewer appears. 4. Select"Enter"andpressSELECT button. The memory viewer start-up image appears briefly and an image stored in the SD memory card is displayed on the screen. * If the image file is not available in the root directory of the SD memory card, the memory viewer browser window appears. 5 Memory viewer function Displaying the memory viewer browser window When you press CANCEL button in the memory viewer mode, following browser window "Thumbnail" or "Filename list" appears on the screen. Thumbnail display Menu Displays current directory path Filename list display Menu Moves to upper directory Displays current directory path 6 * venbeforethecompletionofthumbnailimagesdrawing, theimageselectionisavailablebypressing E point ed 7 8 buttons. The program files (. dpf ) in the DispParam folder under the top directory are displayed. * If the DispParam folder is not placed in the top directory, the list of the folder name is displayed. Find the DispParam folder which stores the program file manually to display the contents of the folder. elect a program file with point buttons and press SELECT button. The dialogue window appears S and select "Yes" and press SELECT button to start the auto display. The images programmed by program file are displayed on the screen. The display period of the image and the number of repeat are set with the program file. During displaying the image, you can control the displayed image with control buttons as described in the table below. Point Operation d e 8 7 Manual playback with next file Manual playback with previous file Start auto-playback Stop auto-playback Termination of memory viewer To terminate the memory viewer function, take one of methods described below. - Terminate with projector's on-screen menu. 1. Select"Wired"or"Wireless"fromtheinputmenuoftheprojector. PressSELECT button. 2. Select"MemoryViewer"withthepointed buttons and press SELECTbutton. The"Enter/Exit"pallet of the memory viewer appears. 3. Select"Exit"andpresstheSELECT button. - Terminate with memory viewer mode 1. [. . . ] 2. MovetheprojectiondatafromthecomputerintotheSDmemorycard. Note: If the network PIN code is set for the projector, the authentication window appears as below. In that case, enter "user" into the User Name column and the network PIN code of the projector into the Password column. *User Name must be "user". 10 * hedataconvertedbytheNetworkViewer5[FileConverter1]canbestoredintotheSDmemorycard T mounted on the projector directly. For further information, refer to chapter Network Viewer function, "Setting of output destination and conversion mode" (p. 113) described on the separated Network Owner's manual for Windows. [. . . ]