User manual SANYO ECD-T1137S

[. . . ] Holder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place. Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. 4 2 5 3 (Fig. Insert fingers into the groove in the front of frame and pull out to remove the frame. [. . . ] If both buttons are not pressed for several seconds, the tuner will return to seek tuning mode and "AUTO" will appear on the display. LOCAL/DISTANCE Press LOC button (2) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is in effect during AUTO SEEK operation. AUTOMATIC MEMORY STORING & PROGRAM SCANNING - Automatic Memory Storing Press ATP button (18) for several seconds, the radio will search from the current station and check the signal strength until one cycle search is finished. The 6 strongest stations detected will be stored into the corresponding preset button. - Program Scanning Press ATP button (18) shortly to scan preset station. STATION STORING Press any one of the preset buttons (14) (M1 to M6) to select a station which had been stored in the memory. Press this button for several seconds to store the current station into that preset button. SEEK FUNCTION Press SEEK button (1) to scan and hear all tunable stations for a few seconds. Press SEEK again to stop at current station. 8 CD OPERATION SELECT TRACKS Press MANU/SKIP button (16) or MANU/SKIP button (17) to move to the previous track or the following track. button (16) or MANU/SKIP button (17) to fast reverse or Hold MANU/SKIP fast forward. CD play starts from when you release the button. PAUSE PLAYING Press PAU button (20) to pause CD player. REPEAT THE SAME TRACK Press RPT button (22) to continuously repeat the same track. PREVIEW ALL TRACKS Press SCN button (21) to play first several seconds of each track on the current disc. Press again to stop intr o and listen to track. PLAY ALL TRACKS IN RANDOM Press SHF button (23) to play all tracks on CD in random or der. EJECT Press (eject) button (4) to stop CD playing and eject the disc from the disc slot (5). 9 Note: A. Attempting to use non-standar d shape discs (e. g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. [. . . ] The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the toll-fr ee number listed below. For product operation, authorized service center referral, service assistance or problem resolution, call CUSTOMER INFORMATION 1-800-421-6382 Weekdays 8:00 AM - 5:00 PM Pacific Time THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED AND USED IN THE UNITED STATES OF AMERICA. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL USER, AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR COMMERCIAL PURPOSE. THE ORIGINAL DATED BILL OF SALE OR SALES SLIP MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED. [. . . ]