User manual SANYO ECD-T1550

[. . . ] OWNER'S MANUAL ECD-T1550 · PLL Synthesizer Stereo Radio · Digital Compact Disc Player · Automatic Memory Storing · Motorized Hidden Panel · Preset Equalization · Auxiliary Input Jack · Credit Card Remote Control · Multi-Color LCD · Plays CD-R/RW discs CONTENTS Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Take out screw before installation . . . 3 DIN Front-Mount (Method A) . . . . . . . . . . . 3 Installing the unit . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Removing the unit . . . . . . . . . . . . . . . . . . . . . . . . 4 DIN Rear-Mount (Method B). . . . . . . . . . . . 5 Using the front panel. . . . . . . . . . . . . . . . . . . . . 6 Wiring Connection . . . . . . . . . . . . . . . . . . . . . . . . . 7 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Switching on/off the unit. . . . . . . . . . . . . . . . . . 9 Faceplate release . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Sound adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Loudness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Set the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Equalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Liquid crystal display. . . . . . . . . . . . . . . . . . . . . . . 9 Flashing LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Remote sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Reset function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radio operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Switching to radio mode . . . . . . . . . . . . . . 10 Selecting the frequency band . . . . . . 10 Selecting station . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Local/distant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Automatic memory storing& program scanning . . . . . . . . . . . . . . . . . . . . . . . . 10 Station storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Mono/stereo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 CD operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Switching to CD mode . . . . . . . . . . . . . . . . . 10 Selecting tracks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Pausing playing. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Previewing all tracks . . . . . . . . . . . . . . . . . . . . 11 2 Repeating the same track . . . . . . . . . . . . 11 Playing all tracks in random . . . . . . . . . 11 Ejecting a disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disc notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 INSTALLATION Notes: · Choose the mounting location where the unit will not interfere with the normal activity of the driver. · Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly. Test to see if the system is working properly. · Use only the parts included with the unit to ensure proper installation. [. . . ] If any button (except button (4)) is pressed in the mute state, the mute mode is released. EQUALIZATION Press EQ button (24) to turn on equalization function and to select desired audio mode. There are five kinds of mode as below: FLAT CLASSICS POP M ROCK M DSP OFF By pressing VOLUME + button (11) or VOLUME- button (27), it is possible to adjust the desired sound quality. BEEP ADJUSTMENT Press SEL button (10) and hold for more than 2 seconds until "BEEP" appears on display. Press VOLUME+ button (11) or VOLUME- button (27) as follows: BEEP 2ND BEEP ALL BEEP OFF LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display (8). AUXILIARY INPUT The unit can be connected to a portable audio player through the AUX IN jack (7). Note : The face plate will not close when something is plugged in the AUX in jack. REMOTE SENSOR Point the remote control handset to the remote sensor IR (23). Press the function keys on the handset to control the system. RESET FUNCTION RESET button (12) can be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. - Error symbol on the display. - BEEP 2ND mode: The beep is only generated when all allowed double function button is pressed long (several seconds). - BEEP ALL mode: The beep is generated when every button is pressed. - BEEP OFF mode: The beep is disabled. 9 OPERATION RADIO OPERATION · SWITCHING TO RADIO MODE Press MOD button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency. · SELECTING THE FREQUENCY BAND At radio mode, press BND/LOUD button (13) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM · AUTOMATIC MEMORY STORING & PROGRAM SCANNING - Automatic Memory Storing Press AMS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. The six strongest stations will be stored into the corresponding preset number button. - Program Scanning Press AMS button (18) shortly to scan preset station stored in memory. · STATION STORING Press any one of the preset buttons (14) (M1 to M6) to select a station which had been stored in the memory. [. . . ] Leave the player off for an hour or so, then try again. Adjust the installation angle less than 30 degrees. Clean the compact disc, then try to play a new one. Front panel is not properly fixed into its place. [. . . ]