User manual SANYO HIT POWER 200 DATASHEET

[. . . ] HIT Photovoltaic Module SANYO HIT® Solar Cell Structure p-type/i-type (Ultra-thin amorphous silicon layer) Front-side electrode Rear-side electrode Thin mono crystalline silicon wafer n Module Efficiency: 17. 2% Cell Efficiency: 19. 7% Power Output: 200 Watts i-type/n-type (Ultra-thin amorphous silicon layer) High Efficiency HIT® Power solar panels are leaders in sunlight conversion efficiency. [. . . ] The packing density of the panels reduces transportation, fuel, and storage costs per installed watt. Approx. 10% Up Module Temp. 75°C HIT 0. 5 c-Si Quality Products SANYO silicon wafers located inside HIT solar panels are made in California USA, and the panels are assembled in an ISO 9001 (quality), 14001 (environment), and 18001 (safety) certified factory. The panels have a Limited 20-Year Power Output and 5-Year Product Workmanship Warranty. Kobe (Japan), July 24, 2007, Faced due South, Tilt angle 30° 5 am 7 am 9 am 11 am 1pm 3 pm 5 pm 7 pm Time Electrical Specifications Model Rated Power (Pmax) 1 HIT Power 200 or HIP-200BA20 200 W 55. 8 V 3. 59 A 68. 7 V 3. 83 A Dependence on Temperature1 4. 50 4. 00 3. 50 3. 00 2. 50 2. 00 1. 50 1. 00 0. 50 0. 00 0 10 20 30 75°C 50°C 25°C Maximum Power Voltage (Vpm) Maximum Power Current (Ipm) Open Circuit Voltage (Voc) Short Circuit Current (Isc) Temperature Coefficient (Pmax) Temperature Coefficient (Voc) Temperature Coefficient (Isc) CEC PTC Rating Cell Efficiency Module Efficiency Watts per Ft. 2 Maximum System Voltage Series Fuse Rating Warranted Tolerance (-/+) Current (A) -0. 348 % / °C -0. 190 V / °C 2 . 01 mA / °C 185. 9 W 19. 7% 17. 2% 16. 0 W 600 V 15 A -0% / +10% 0°C Mechanical Specifications Internal Bypass Diodes Module Area Weight Dimensions LxWxH Cable Length -Male/+Female Cable Size / Connector Type Static Wind / Snow Load Pallet Dimensions LxWxH Quantity per Pallet / Pallet Weight Quantity per 20', 40', and 53' Container 4 Bypass Diodes 12. 49 Ft. 2 (1. 16m2) 33. 07 Lbs. (780/630mm) No. 12 AWG / MC4TM Locking Connectors 60PSF (2880Pa) / 39PSF (1867Pa) 53x35x77 in. (530kg) Voltage (V) 40 50 60 70 80 Dependence on Irradiance1 4. 50 4. 00 1000W/m2 3. 50 3. 00 800W/m 2 Current (A) 340 pcs. , 714 pcs. , 918 pcs. 2. 50 2. 00 1. 50 1. 00 0. 50 0. 00 0 Operating Conditions & Safety Ratings Ambient Operating Temperature NOCT Hail Safety Impact Velocity Fire Safety Classification Safety & Rating Certifications Limited Warranty 1 600W/m 2 -4°F to 115°F (-20°C to 46°C)2 113°F (45°C) 1" hailstone (25mm) at 52 mph (23m/s) Class C UL 1703, cUL, CEC 5 Years Workmanship, 20 Years Power Output 400W/m 2 200W/m 2 10 20 30 40 50 60 70 80 STC: Cell Temp. 25oC, AM1. 5, 1000W/m2 2Monthly average low and high of the installation site. Note: Specifications and information above may change without notice. Voltage (V) Dimensions Unit: inches (mm) 34. 6 (880) 1. 8 (46) 17. 3 (440) 0. 205 (5. 2) 0. 165 (4. 2) 13 (330) 1. 8 (46) 0. 5 (13) CAUTION!Read the operating instructions carefully before use of these products 0. 276 (7) 1. 5 (37) 0. 276 (7) Section A-A' 51. 9 (1319) 4x mounting holes 0. 276 (7) 0. 276 (7) SANYO Energy (U. S. A. ) Corp. [. . . ] 9/1/2009 Ground (4 places) 0. 165 (4. 2) 0. 205 (5. 2) Front Side Back [. . . ]