User manual SANYO HIT POWER 215N DATASHEET

[. . . ] 215N Module Efficiency: 17. 1% Cell Efficiency: 19. 3% Power Output - 215 Watts HIT solar cells are hybrids of mono crystalline silicon surrounded by ultra-thin amorphous silicon layers, and are available solely from SANYO. SANYO'S Proprietary Technology High Efficiency HIT® Power solar panels are leaders in sunlight conversion efficiency. [. . . ] The panels have a Limited 20-Year Power Output and 5-Year Product Workmanship Warranty. Fig. 1 215N Electrical Specifications Model Rated Power (Pmax)1 Maximum Power Voltage (Vpm) Maximum Power Current (Ipm) Open Circuit Voltage (Voc) Short Circuit Current (Isc) Temperature Coefficient (Pmax) Temperature Coefficient (Voc) Temperature Coefficient (Isc) NOCT CEC PTC Rating Cell Efficiency Module Efficiency Watts per Ft. 2 Maximum System Voltage Series Fuse Rating Warranted Tolerance (-/+) HIT Power 215N or HIP-215NKHA6 215 W 42. 0 V 5. 13 A 51. 6 V 5. 61 A 4. 50 Dependence of I ­ V Characteristics on Temperature (Reference) TYPE: HIT Power 215N Dependence on Temperature 6. 00 -1. 51000 75 4. 00 3. 50 3. 00 2. 50 2. 00 1. 50 1. 00 0. 50 0. 00 0 5. 00 75°C 50°C 50 25 0 -0. 143 V/ °C 1. 96 mA/ °C 114. 8°F (46°C) 199. 6 W 19. 3% 17. 1% 15. 85 W 600 V 15 A -0% / +10% Current (A) Current (A) -0. 336%/ °C 4. 00 25°C Current[A] 3. 00 0°C 2. 00 1. 00 HIP215NKHA5090209 Fig. 2 Dependence of30 ­ V Characteristics on Irradiance (Reference) 60 I 0 20 10 30 50 10 40 20 50 60 70 40 80 Voltage[V] Voltage HIT Power 215N TYPE: (V) 0. 00 Mechanical Specifications Internal Bypass Diodes Module Area Weight Dimensions LxWxH Cable Length +Male/-Female Cable Size / Connector Type Static Wind / Snow Load Pallet Dimensions LxWxH Quantity per Pallet / Pallet Weight Quantity per 53' Trailer 3 Bypass Diodes 13. 56 Ft2 (1. 26m2) 35. 3 Lbs. 12 AWG / MC4TM Locking Connectors 4. 50 4. 00 3. 50 Voltage (V) 0, 25, 50, 75Cell temperature Cell temperature25 Dependence on Irradiance 1000 W/m2 6. 00 1000W/m 2 Current (A) 60PSF (2880Pa) / 39PSF (1867Pa) 63. 2x32x72. 8 in. (1607x815x1850 mm) 34 pcs. /1234. 5 Lbs (560 kg) 952 pcs. 3. 00 2. 50 2. 00 1. 50 1. 00 0. 50 0. 00 0 5. 00 800 W/m2 800W/m 2 4. 00 600 W/m2 Current[A] SANYO Electric Co. , Ltd. Current (A) 600W/m 2 Operating Conditions & Safety Ratings Ambient Operating Temperature Hail Safety Impact Velocity Fire Safety Classification Safety & Rating Certifications Limited Warranty 1 3. 00 400 W/m2 -4°F to 115°F (-20°C to 46°C) Class C UL 1703, cUL, CEC 2 400W/m 2 2. 00 1" hailstone (25mm) at 52 mph (23m/s) 200 W/m2 1. 00 200W/m 2 5 Years Workmanship, 20 Years Power Output STC: Cell temp. 25°C, AM1. 5, 1000W/m2 2Monthly average low and high of the installation site. Note: Specifications and information above may change without notice. 10 0. 00 20 30 40 50 60 70 80 0 10 Voltage 20 (V) 30 40 50 60 31. 4 (798) 35. 4 (898) 2. 4 (60) 1. 8 (46) Ground (1 place) 1. 8 (46) Dimensions Unit: inches (mm) Section A-A' Voltage (V) Voltage[V] 4. 2 (107) 15. 47 (393) 1. 5 (37) 17. 7 (449) 13 (330) 0. 3 (7) 2. 4 (60) 0. 165 (4. 2) negative (-) 0. 205 (5. 2) positive (+) 40. 55 (1030) Junction Box 0. 04 (1) CAUTION!Read the SANYO Electric Co. , Ltd. 24. 4 (620) Connector (MCTM Plug) 34. 6 (880) operating instructions carefully before use of these products 0. 276 (7) 0. 3 (7) 0. 276 (7) 0. 8 (19. 3) 53. 2 (1351) 62. 2 (1580) Section A-A' 4x mounting holes 0. 276 (7) + Note: A module must be installed on a support structure rail using four symmetrical mounting 0. 276 points within Range A (7) = Range A 24. 4 (620) SANYO Energy (U. S. A. ) Corp. [. . . ] 9/1/2009 Ground (4 places) 15. 4 (392) 15. 4 (392) FRONT SIDE BACK 0. 165 (4. 2) 0. 205 (5. 2) Front Side Back [. . . ]