User manual SANYO HT32546

[. . . ] Model Number Trade Name Responsible party Address : : : : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Location For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its installation: Shield it from direct sunlight and keep it away from sources of intense heat. [. . . ] The INITIAL SET sub-menu appears, and the cursor is positioned at LANGUAGE/CLOCK SET. 2 Use the jog dial to move the cursor to TIME PERIOD SET, and then turn the shuttle dial clockwise. The TIME PERIOD SET sub-menu appears. · To change camera images into automatic switching screens. Set "SEQUENCE" on SCREEN SET screen <SCREEN SET> 1. MULTI SCREEN : CHANGE MULTI SCREEN SET -> 2. SEQUENCE : INDIV. SEQUENCE SET -> 3. MASK : ON MASK SET -> 3 Turn the jog dial to select TIME PERIOD A, and then turn the shuttle dial clockwise. Note: This can also be set using the numeric keys. (See page 43. ) "00" (hour) flashes in the "T1" column. <TIME PERIOD SET> TIME PERIOD T1 T2 T3 T4 TIME PERIOD A 00:00 00:00 00:00 00:00 TIME PERIOD B 00:00 00:00 00:00 00:00 · To hide camera images with a gray pattern Set the "MASK" setting in the SCREEN SET menu. <SCREEN SET> 1. MULTI SCREEN : CHANGE MULTI SCREEN SET -> 2. SEQUENCE : INDIV. SEQUENCE SET -> 3. MASK : ON MASK SET -> 4 Turn the jog dial to change the T1 setting to " 04" (hour), and then turn the shuttle dial clockwise. "00" (minutes) flashes in the "T1" column. 5 Turn the jog dial to change the T1 setting to " 00" (minutes), and then turn the shuttle dial clockwise. "00" (hour) flashes in the "T2" column. · To detect an alarm input in a camera image Set "MOTION SENSOR" on ALARM OPERATION SET screen <ALARM OPERATION MAIN MON. DISPLAY ALARM PRIORITY MON. 2 DISPLAY RETRIGGER MOTION SENSOR ALARM DURATION SET SET> : FULL : LAST : ON : ON -> -> 6 Turn the jog dial to change the T2 setting to " 06" (hour), and then turn the shuttle dial clockwise. "00" (minutes) flashes in the "T2" column. <TIME PERIOD SET> TIME PERIOD T1 T2 T3 T4 TIME PERIOD A 04:00 06:00 00:00 00:00 TIME PERIOD B 00:00 00:00 00:00 00:00 7 Turn the jog dial to change the T2 setting to " 30" (minutes), For these settings, set Example 2 consecutively with Example 1. All cameras that are connected to the digital video recorder are detected, and the settings for any unconnected cameras are changed to "OFF". English 49 RECORDING SETTING Main manu <MAIN MENU> 1. INITIAL SET 2. RECORD SET 3. GENERAL SET 4. SCREEN SET 5. POWER FAILURE/USED TIME 6. COPY MENU SETTINGS -> -> -> -> -> -> A RECORDING AREA SET menu <RECORDING AREA SET> TOTAL CAPACITY NORMAL RECORDING AREA AREA FULL RESET -> ALARM RECORDING AREA AREA FULL RESET -> ARCHIVE AREA AREA FULL RESET -> : : : : 80GB 80 % 19 % 1% Displays the total capacity of the hard disk. Sets the capacity of the normal recording area. Normal recording area CAUTION : WHEN THE AREA SETTING IS CHANGED, THE WHOLE AREA WILL BE INITIALIZED ! MOVE LINES WITH JOG, SELECT WITH SHUTTLE B RECORDING CONDITIONS SET menu <RECORDING CONDITIONS SET> DIGITAL SERIES RECORDING : OFF TOTAL NUMBER :1 NORMAL RECORDING AREA OVERWRITE ALARM RECORDING AREA OVERWRITE REMAINING DISK WARNING Sets the capacity of the archive recording area. Archive recording area Sets the capacity of the alarm recording area. Alarm recording area : OFF : OFF : 1% <RECORD SET> 1. RECORDING AREA SET -> 2. RECORDING CONDITIONS SET -> 3. NORMAL REC MODE SET -> 4. PROGRAM REC SET -> 5. TIMER SET -> 6. ALARM REC MODE SET -> 7. ALARM OPERATION SET -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE Changes the settings for connections when more than one (maximum of 2) digital video recorder is connected together for series recording. Changes the overwriting setting for the normal recording area. Changes the overwriting setting for the alarm recording area. Changes the warning settings for the remaining recording area. Changes the image quality settings. C NORMAL REC MODE SET menu <NORMAL REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF REC RATE : 30FPS ( 18H) REC CAMERA GROUP : OFF D PROGRAM 1 SET MENU menu <PROGRAM REC SET> P-1 SELECT INDIVIDUAL CAMERA RATE(FPS) 01:0. 313 02:0. 313 03:0. 313 04:0. 313 05:0. 313 06:0. 313 07:0. 313 08:0. 313 09:0. 313 10:0. 313 11:0. 313 12:0. 313 13:0. 313 14:0. 313 15:0. 313 16:0. 313 NORMAL REC: 23H ALARM REC : 01360 Changes the audio recording settings. Changes the recording cycle (recording speed) settings. Values in brackets are available recording times. Specifies the program numbers for program recording. 4 can be set, and recording can then be carried out simply by specifying the camera for recording. The recording period can be changed separately for each camera. You must always set the timer when carrying out timer recording. E TIMER SET menu WEEK SUN MON THE WED THU FRI SAT DLY START --:---:---:---:---:---:---:---:-<TIMER SET> STOP PROGRAM --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF --:-- OFF FPS 30FPS 30FPS 30FPS 30FPS 30FPS 30FPS 30FPS 30FPS SET OFF OFF OFF OFF OFF OFF OFF OFF F ALARM REC MODE SET menu <ALARM REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF ALARM RECORDING : OFF ALARM INTERLEAVE : ONLY PROGRAM GROUP : OFF REC RATE: @ 30FPS, DURATION: 5SEC PRE-ALARM RECORDING : ¤¤¤ REC RATE: **** FPS, DURATION: *** => (07733 ALARMS CAN BE RECORDED ) ALARM TRIGGER : ALARM Changes the settings for alarm recording and pre-alarm recording. G ALARM OPERATION SET menu <ALARM OPERATION MAIN MON. [. . . ] After the computer transmits one byte of data, it waits for a response from the digital video recorder, and then transmits the next byte of data. To start sending commands, an ON (F6) command is sent. The digital video recorder will continue to receive commands until an OFF (F7) command is sent to stop. The digital video recorder sends an ACK (OA) each time it receives a command. [. . . ]