User manual SANYO PDG-DET100 CABINET DRAWING

[. . . ] 10 IMAGE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 D. ZOOM + Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 D. ZOOM ­ Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 POINTER RIGHT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] During this time, it cannot process command. 0û For 7 seconds after starting POWER ON in the status of STANDBY, the projector returns "Acceptable" response, but it does not carry out the command. carried out in 500 ms after the "Acceptable" response is returned. 0û About the behavior during Count Down and Cooling Down operation; in the period of the Count Down operation after Power ON or Cooling Down after Power OFF, "Acceptable" response is returned, but the command is not carried out except for Status Read command. 0û About the behavior during switching inputs; it takes 5 seconds to switch inputs after receiving the command. During this period, even if another command is received, it is not carried out although returning "Acceptable" response. However, Status Read commands are carried out in 500 ms after the "Acceptable" response is returned. 0û The length of the returned value for Status Read command in successful operation depends on the command. 0û The characters for commands must be in uppercase (A - Z). Those in lowercase can not be used Status Read commands are 5/23 PDG-DET100 Basic Serial Command Functional Specifications 4 Functional Execution Command Table Command C00 C01 C05 C06 C07 C08 C0D C0E C0F C10 C1C C1D C1E C27 C30 C31 C3A C3B C3C C3D C3F Item POWER ON POWER OFF (Immediate POWER OFF) INPUT 1 INPUT 2 INPUT 3 INPUT 4 VIDEO MUTE ON VIDEO MUTE OFF SCREEN NORMAL SIZE SCREEN WIDE SIZE MENU ON MENU OFF DISPLAY CLEAR IMAGE D. ZOOM + D. ZOOM POINTER RIGHT POINTER LEFT POINITER UP POINITER DOWN ENTER Command C43 C44 C46 C47 C4A C4B C5D C5E C5F C60 C89 C8A C8E C8F C90 C91 FREEZE ON FREEZE OFF ZOOM ZOOM + FOUCS FOUCS + LENS SHIFT UP LENS SHIFT DOWN LENS SHIFT LEFT LENS SHIFT RIGHT AUTO PC ADJ. PRESENTATION TIMER KEYSTONE KEYSTONE KEYSTONE KEYSTONE Item 5 Status Read Command Table Command CR0 CR1 CR3 CR4 CR6 CR7 Status Read Input Mode Read Lamp Time Read Setting Read Temp. Acceptable Unacceptable [ACK] [CR] "?" [CR] Response 6. 25 ENTER Command COMMAND Detail Response "C3F" [CR] This command works the same way as "SELECT" button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR] 11/23 PDG-DET100 Basic Serial Command Functional Specifications 6. 26 FREEZE ON Command COMMAND Detail "C43" [CR] Freeze on-screen picture This command works the same way as "FREEZE" button of the remote control, but it works only for turning on, not for turning off Freeze. Acceptable Unacceptable [ACK] [CR] "?" [CR] Response 6. 27 FREEZE OFF Command COMMAND Detail "C44" [CR] Cancel Freeze function This command works the same way as "FREEZE" button of the remote control, but it works only for turning off, not for turning on Freeze. Acceptable Unacceptable [ACK] [CR] "?" [CR] Response 6. 28 ZOOM + Command COMMAND Detail "C47" [CR] Make screen image larger This command works the same way as "ZOOM" button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR] Response 6. 29 ZOOM ­ COMMAND COMMAND Detail "C46" [CR] Make screen image smaller This command works the same as "ZOOM " button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR] Response 6. 30 FOCUS + Command COMMAND "C4B" [CR] Adjust focus of screen image (sharp and clear) with a long-focal-length ("=) (The lens direction is backward) This command works the same way as "FOCUS " button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR] Detail Response 12/23 PDG-DET100 Basic Serial Command Functional Specifications 6. 31 FOCUS ­ Command COMMAND "C4A" [CR] Adjust focus of screen image (sharp and clear) with a short-focal-length (The lens direction is forward) This command works the same way as "FOCUS " button of the projector and remote control. Acceptable Unacceptable [ACK] [CR] "?" [CR] Detail Response 6. 32 LENS SHIFT UP Command COMMAND Detail Response "C5D" [CR] Move screen image upward Acceptable Unacceptable [ACK] [CR] "?" [CR] 6. 33 LENS SHIFT DOWN Command COMMAND Detail Response "C5E" [CR] Move screen image downward Acceptable Unacceptable [ACK] [CR] "?" [CR] 6. 34 LENS SHIFT LEFT Command COMMAND Detail Response "C5F" [CR] Move screen image to the left. Acceptable Unacceptable [ACK] [CR] "?" [CR] 6. 35 LENS SHIFT RIGHT Command COMMAND Detail Response "C60" [CR] Move screen image to the right. Acceptable Unacceptable [ACK] [CR] "?" [CR] 6. 36 AUTO PC ADJ. Command COMMAND "C89" [CR] Execute Auto PC Adj. [. . . ] %1 = lamp No. 1 %2 = lamp No. 2 ex; "0410_0410_0410_0410" [CR] Lamp No. 1 = 410 Hours Lamp No. 2 = 410 Hours Note; -each data shall be 4 digits. -"9999" is returned for 10000 hours or more. "?" [CR] Response %1, %2 Unacceptable 7. 6 Setting Read Command COMMAND Detail "CR4" [CR] Get screen setting status of Ceiling/Rear. Acceptable "%1" [CR] "11" [CR] = Normal Screen Setting "10" [CR] = Picture is top/bottom reversed (Status: Rear & Ceiling ON) "01" [CR] = Picture is left/right reversed (Status: Rear ON) "00" [CR] = Picture is top/bottom and left/right reversed (Status: Ceiling ON) "?" [CR] Response %1 Unacceptable 19/23 PDG-DET100 Basic Serial Command Functional Specifications 7. 7 Temp Read Command COMMAND Detail "CR6" [CR] Get the temperature information inside projector With more than one temperature sensors installed in the projector, it is possible to get all temperatures at once. [. . . ]