User manual SANYO PLC-XE40

[. . . ] Multimedia Projector MODEL PLC-XE40 Owner's Manual Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16. 77 million colors, and matrix liquid crystal display (LCD) technology. Large Screen in Limited Space - Short focus lens allows you to project large images from short distance. 14) Quick Termination The AC power cord can be unplugged immediately after turning off the projector without waiting for the projector to cool down. 20) Antitheft Alarm Function This projector is equipped with an Antitheft alarm function which sounds when a vibration is detected. [. . . ] To save the scale, press the SELECT button at "Yes". When "Custom" is selected, the saved scale is used. Reset . . . . . . . . . . . . Reset "Common" data. Press the SELECT button at "Reset" to display the confirmation box. To reset, press the SELECT button at "Yes". Press the SELECT button at "Common" or "Reset", to display confirmation box. Note: ·When no signal is detected, Normal is set automatically and "Aspect" screen disappears. · The adjustable range of Scale H/V and Position H/V can be limited depending on the input signal. For zooming in and out the images Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and "D. Press the SELECT button to expand the image size. And press the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D. ZOOM button on the remote control. Digital zoom ­ When Digital zoom ­ is selected, the On-Screen Menu disappears and "D. Press the SELECT button to compress image size. A projected image can be also compressed by pressing the D. ZOOM button on the remote control. To exit the Digital zoom +/­ mode, press any button except the D. ZOOM buttons, SELECT, and Point button. To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p. 26) again, or adjust the screen size with the D. ZOOM buttons. Remote Control POINT buttons SELECT button D. ZOOM + button D. ZOOM - button Note: · The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used. 30) · The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working. · True, Full screen, and Digital zoom +/­ cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p. 27) · Digital zoom +/- cannot be selected when Full screen or True is selected. 34 Video Input Input Source Selection (Video, S-Video) Direct Operation Select Video by pressing the VIDEO button on the remote control. Before using VIDEO button, select the correct input source through menu operation as described below. Remote Control VIDEO button Menu Operation Input Menu icon Input Menu Move the pointer to Video and press the SELECT button. 1 2 3 Press the MENU button to display the On-Screen Menu. [. . . ] Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. It may cause an electric shock or a fire hazard. · · · green. · · · blinks green. · · · red · · · blinks red. · · · off When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. [. . . ]