User manual SANYO PLC-XF46

[. . . ] Multimedia Projector MODEL PLC-XF46N/E Projection lens is optional. Owner's Manual TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in better condition for a considerable time. Improper operation may result in not only shortening the product life, but also malfunctions, fire hazard, or other accidents. [. . . ] Standard IMAGE SELECT MENU IMAGE SELECT Menu icon Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P32). Level being selected. Move a red frame icon to level and press SELECT button. 31 COMPUTER INPUT IMAGE LEVEL ADJUSTMENT 1 2 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Adjust each level by pressing POINT LEFT/RIGHT button(s). Contrast IMAGE ADJUST MENU IMAGE ADJUST Menu icon Move a red frame pointer to item to be selected and then press SELECT button. Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63. ) Brightness Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. Press either POINT LEFT button or POINT RIGHT button to Color temp. (XLow, Low, Mid or High) White balance (Red) Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63. ) White balance (Green) Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63. ) White balance (Blue) Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63. ) Sharpness Press POINT LEFT button to soften image, and POINT RIGHT button to sharpen image. (From 0 to 15. ) Gamma Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15. ) Noise reduction Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to "On" to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off. Progressive Press POINT LEFT/RIGHT button(s) to change progressive scan mode. Dialog box display is changed to "Off" and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on. Selected Image level Press POINT LEFT/RIGHT buttons to adjust value. Store icon Press SELECT button at this icon to store adjustment. Image Level Menu Move a red frame pointer to any of Image 1 to 4 where you want to set and then press SELECT button. 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Move a red frame pointer to Image 1 to 4 where you want to set and then press SELECT button. [. . . ] 1. ) Turn the projector on and operate Lens shift, Zoom and Focus fully to check Light-Block Sheets. If Light-Block Sheets interfere with those operations, check Light-Block Sheets are set properly. 8 9 10 Slide both upper sides of LIGHT BLOCK Sheets in between 1 and 2 . 1 CABINET FLAP Slide into front of the flap. UPPER LENS COVER 2 GUIDE LIGHT-BLOCK SHEETS FLAP LOWER LENS COVER Slide into front of the flap. E Fig-9 -5- FOCUS ADJUSTMENT (For Model LNS-W03) Set up the projector and project image on the screen. Loosen the Focus Lock Screw on the projection lens. [. . . ]