User manual SANYO PLC-XF70

[. . . ] Multimedia Projector MODEL PLC-XF70 Projection lens is optional. Owner's Manual Features and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1. 07 billion colors, and matrix liquid crystal display (LCD) technology. Functionally Rich Multilanguage Menu Display This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. Operation menu is available in 12 languages; English, German, French, It alian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, and Japanese (p. 48). Simple Computer System Setting Logo Function The projector has the Multi-scan system to conform to almost all computer output signals quickly (p. 34). [. . . ] Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears. Note: ·Wide cannot be operated when "720p, " "1035i, or "1080i" is selected on AV System " Menu (p. 41). Scale H/V . . . . . . . . . . . . . . Adjust the Horizontal/Vertical screen scale. When set to "On, the aspect ratio is " fixed. The "Scale V" appears dimmed and becomes unavailable. Adjust "Scale H, " then the screen scale is automatically modified based on the aspect ratio. Adjust the Horizontal/Vertical screen position. Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at "Yes. " When Custom is selected, the saved scale is used. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes. " Press the SELECT button at Common or Reset, to display a confirmation box. Note: ·When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. ·The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. 4 Video Input Keystone This function is used to store or reset the keystone correction when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Keep the keystone correction even when the Main On/Off Switch is pressed to Off or the AC power cord is unplugged. Release the keystone correction when the Main On/ Off Switch is pressed to Off or the AC power cord is unplugged. To correct keystone distortion, press the Select button. Use the Point ed7 8 buttons to correct keystone distortion. (p. 30) Ceiling When this function is set to "On, the picture is top/bottom and " left/right reversed. This function is used to project the image from a ceiling-mounted projector. [. . . ] Wired Remote Cable(30m) Optional Interface Board (DVI) Optional Interface Board (5-BNC) Optional Interface Board (D-sub 15) Optional Interface Board (Dual-SDI) Optional Interface Board (Network board) Optional Interface Board (DVI / D-sub 15) Optional Interface Board (5-BNC / VIDEO) : POA-CA-RC30 : POA-MD18DVI : POA-MD16VD1 : POA-MD04VGA : POA-MD17SDID : POA-MD13NET2 : POA-MD23ADI : POA-MD25VD3 78 Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 5 15 10 4 14 9 3 13 2 8 12 7 1 6 11 1 4 5 6 7 8 Red Input Green Input Blue Input No Connect Ground (Horiz. sync. ) Ground (Red) Ground (Green) Ground (Blue) 9 10 11 1 1 14 15 +5V Power Ground (Vert. DDC Clock DIGITAL DVI-D (DVI 4 PIN) 1 4 5 6 7 8 T. M. D. S. Data2 Shield No Connect No Connect DDC Clock DDC Data No Connect 9 10 11 1 1 14 15 16 T. M. D. S. Data1 Shield No Connect No Connect +5V Power Ground (for +5V) Hot Plug Detect 17 18 19 0 1 4 T. M. D. S. [. . . ]